Re: [PATCH v1 1/5] dt-bindings: dmaengine: qcom: gpi: Add additional arg to dma-cell property
From: Rob Herring (Arm)
Date: Tue Oct 15 2024 - 09:27:38 EST
On Tue, 15 Oct 2024 17:37:46 +0530, Jyothi Kumar Seerapu wrote:
> When high performance with multiple i2c messages in a single transfer
> is required, employ Block Event Interrupt (BEI) to trigger interrupts
> after specific messages transfer and the last message transfer,
> thereby reducing interrupts.
>
> For each i2c message transfer, a series of Transfer Request Elements(TREs)
> must be programmed, including config tre for frequency configuration,
> go tre for holding i2c address and dma tre for holding dma buffer address,
> length as per the hardware programming guide. For transfer using BEI,
> multiple I2C messages may necessitate the preparation of config, go,
> and tx DMA TREs. However, a channel TRE size of 64 is often insufficient,
> potentially leading to failures due to inadequate memory space.
>
> Add additional argument to dma-cell property for channel TRE size.
> With this, adjust the channel TRE size via the device tree.
> The default size is 64, but clients can modify this value based on
> their specific requirements.
>
> Signed-off-by: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
> ---
> Documentation/devicetree/bindings/dma/qcom,gpi.yaml | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/dma/qcom,gpi.yaml: properties:#dma-cells: 'minItems' is not one of ['description', 'deprecated', 'const', 'enum', 'minimum', 'maximum', 'multipleOf', 'default', '$ref', 'oneOf']
from schema $id: http://devicetree.org/meta-schemas/core.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/dma/qcom,gpi.yaml: properties:#dma-cells: 'maxItems' is not one of ['description', 'deprecated', 'const', 'enum', 'minimum', 'maximum', 'multipleOf', 'default', '$ref', 'oneOf']
from schema $id: http://devicetree.org/meta-schemas/core.yaml#
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20241015120750.21217-2-quic_jseerapu@xxxxxxxxxxx
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.