[PATCH v2 01/22] dt-bindings: net: wireless: describe the ath12k AHB module

From: Raj Kumar Bhagat
Date: Tue Oct 15 2024 - 14:27:53 EST


Add device-tree bindings for the ATH12K module found in the IPQ5332
device.

Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@xxxxxxxxxxx>
---
.../net/wireless/qcom,ath12k-ahb.yaml | 293 ++++++++++++++++++
1 file changed, 293 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/wireless/qcom,ath12k-ahb.yaml

diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath12k-ahb.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath12k-ahb.yaml
new file mode 100644
index 000000000000..54784e396d7e
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath12k-ahb.yaml
@@ -0,0 +1,293 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/qcom,ath12k-ahb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies ath12k wireless devices (AHB)
+
+maintainers:
+ - Kalle Valo <kvalo@xxxxxxxxxx>
+ - Jeff Johnson <jjohnson@xxxxxxxxxx>
+
+description:
+ Qualcomm Technologies IEEE 802.11be AHB devices.
+
+properties:
+ compatible:
+ enum:
+ - qcom,ipq5332-wifi
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: XO clock used for copy engine
+
+ clock-names:
+ items:
+ - const: gcc_xo_clk
+
+ interrupts:
+ items:
+ - description: Ready interrupt
+ - description: Spawn acknowledge interrupt
+ - description: Stop acknowledge interrupt
+ - description: misc-pulse1 interrupt events
+ - description: misc-latch interrupt events
+ - description: sw exception interrupt events
+ - description: interrupt event for ring CE0
+ - description: interrupt event for ring CE1
+ - description: interrupt event for ring CE2
+ - description: interrupt event for ring CE3
+ - description: interrupt event for ring CE4
+ - description: interrupt event for ring CE5
+ - description: interrupt event for ring CE6
+ - description: interrupt event for ring CE7
+ - description: interrupt event for ring CE8
+ - description: interrupt event for ring CE9
+ - description: interrupt event for ring CE10
+ - description: interrupt event for ring CE11
+ - description: interrupt event for ring host2wbm-desc-feed
+ - description: interrupt event for ring host2reo-re-injection
+ - description: interrupt event for ring host2reo-command
+ - description: interrupt event for ring host2rxdma-monitor-ring1
+ - description: interrupt event for ring reo2ost-exception
+ - description: interrupt event for ring wbm2host-rx-release
+ - description: interrupt event for ring reo2host-status
+ - description: interrupt event for ring reo2host-destination-ring4
+ - description: interrupt event for ring reo2host-destination-ring3
+ - description: interrupt event for ring reo2host-destination-ring2
+ - description: interrupt event for ring reo2host-destination-ring1
+ - description: interrupt event for ring rxdma2host-monitor-destination-mac3
+ - description: interrupt event for ring rxdma2host-monitor-destination-mac2
+ - description: interrupt event for ring rxdma2host-monitor-destination-mac1
+ - description: interrupt event for ring host2rxdma-host-buf-ring-mac3
+ - description: interrupt event for ring host2rxdma-host-buf-ring-mac2
+ - description: interrupt event for ring host2rxdma-host-buf-ring-mac1
+ - description: interrupt event for ring host2tcl-input-ring4
+ - description: interrupt event for ring host2tcl-input-ring3
+ - description: interrupt event for ring host2tcl-input-ring2
+ - description: interrupt event for ring host2tcl-input-ring1
+ - description: interrupt event for ring wbm2host-tx-completions-ring4
+ - description: interrupt event for ring wbm2host-tx-completions-ring3
+ - description: interrupt event for ring wbm2host-tx-completions-ring2
+ - description: interrupt event for ring wbm2host-tx-completions-ring1
+ - description: interrupt event for ring host2tx-monitor-ring1
+ - description: interrupt event for ring txmon2host-monitor-destination-mac3
+ - description: interrupt event for ring txmon2host-monitor-destination-mac2
+ - description: interrupt event for ring txmon2host-monitor-destination-mac1
+ - description: interrupt event for umac_reset
+
+ interrupt-names:
+ items:
+ - const: ready
+ - const: spawn
+ - const: stop-ack
+ - const: misc-pulse1
+ - const: misc-latch
+ - const: sw-exception
+ - const: ce0
+ - const: ce1
+ - const: ce2
+ - const: ce3
+ - const: ce4
+ - const: ce5
+ - const: ce6
+ - const: ce7
+ - const: ce8
+ - const: ce9
+ - const: ce10
+ - const: ce11
+ - const: host2wbm-desc-feed
+ - const: host2reo-re-injection
+ - const: host2reo-command
+ - const: host2rxdma-monitor-ring1
+ - const: reo2ost-exception
+ - const: wbm2host-rx-release
+ - const: reo2host-status
+ - const: reo2host-destination-ring4
+ - const: reo2host-destination-ring3
+ - const: reo2host-destination-ring2
+ - const: reo2host-destination-ring1
+ - const: rxdma2host-monitor-destination-mac3
+ - const: rxdma2host-monitor-destination-mac2
+ - const: rxdma2host-monitor-destination-mac1
+ - const: host2rxdma-host-buf-ring-mac3
+ - const: host2rxdma-host-buf-ring-mac2
+ - const: host2rxdma-host-buf-ring-mac1
+ - const: host2tcl-input-ring4
+ - const: host2tcl-input-ring3
+ - const: host2tcl-input-ring2
+ - const: host2tcl-input-ring1
+ - const: wbm2host-tx-completions-ring4
+ - const: wbm2host-tx-completions-ring3
+ - const: wbm2host-tx-completions-ring2
+ - const: wbm2host-tx-completions-ring1
+ - const: host2tx-monitor-ring1
+ - const: txmon2host-monitor-destination-mac3
+ - const: txmon2host-monitor-destination-mac2
+ - const: txmon2host-monitor-destination-mac1
+ - const: umac_reset
+
+ memory-region:
+ minItems: 1
+ description:
+ phandle to a node describing reserved memory (System RAM memory)
+ used by ath12k firmware (see bindings/reserved-memory/reserved-memory.txt)
+
+ qcom,rproc:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ DT entry of a WCSS node. WCSS node is the child node of q6 remoteproc driver.
+ (see bindings/remoteproc/qcom,multipd-pil.yaml)
+
+ qcom,smem-states:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: States used by the AP to signal the remote processor
+ items:
+ - description: Shutdown WCSS pd
+ - description: Stop WCSS pd
+ - description: Spawn WCSS pd
+
+ qcom,smem-state-names:
+ description:
+ Names of the states used by the AP to signal the remote processor
+ items:
+ - const: shutdown
+ - const: stop
+ - const: spawn
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - interrupts
+ - interrupt-names
+ - memory-region
+ - qcom,rproc
+ - qcom,smem-states
+ - qcom,smem-state-names
+
+additionalProperties: false
+
+examples:
+ - |
+
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/qcom,ipq5332-gcc.h>
+
+ wifi0: wifi@c0000000 {
+ compatible = "qcom,ipq5332-wifi";
+ reg = <0xc000000 0x1000000>;
+ clocks = <&gcc GCC_XO_CLK>;
+ clock-names = "gcc_xo_clk";
+ interrupts-extended = <&wcss_smp2p_in 9 IRQ_TYPE_NONE>,
+ <&wcss_smp2p_in 12 IRQ_TYPE_NONE>,
+ <&wcss_smp2p_in 11 IRQ_TYPE_NONE>,
+ <&intc GIC_SPI 559 IRQ_TYPE_EDGE_RISING>,
+ <&intc GIC_SPI 560 IRQ_TYPE_EDGE_RISING>,
+ <&intc GIC_SPI 561 IRQ_TYPE_EDGE_RISING>,
+ <&intc GIC_SPI 422 IRQ_TYPE_EDGE_RISING>,
+ <&intc GIC_SPI 423 IRQ_TYPE_EDGE_RISING>,
+ <&intc GIC_SPI 424 IRQ_TYPE_EDGE_RISING>,
+ <&intc GIC_SPI 425 IRQ_TYPE_EDGE_RISING>,
+ <&intc GIC_SPI 426 IRQ_TYPE_EDGE_RISING>,
+ <&intc GIC_SPI 427 IRQ_TYPE_EDGE_RISING>,
+ <&intc GIC_SPI 428 IRQ_TYPE_EDGE_RISING>,
+ <&intc GIC_SPI 429 IRQ_TYPE_EDGE_RISING>,
+ <&intc GIC_SPI 430 IRQ_TYPE_EDGE_RISING>,
+ <&intc GIC_SPI 431 IRQ_TYPE_EDGE_RISING>,
+ <&intc GIC_SPI 432 IRQ_TYPE_EDGE_RISING>,
+ <&intc GIC_SPI 433 IRQ_TYPE_EDGE_RISING>,
+ <&intc GIC_SPI 491 IRQ_TYPE_EDGE_RISING>,
+ <&intc GIC_SPI 495 IRQ_TYPE_EDGE_RISING>,
+ <&intc GIC_SPI 493 IRQ_TYPE_EDGE_RISING>,
+ <&intc GIC_SPI 544 IRQ_TYPE_EDGE_RISING>,
+ <&intc GIC_SPI 457 IRQ_TYPE_EDGE_RISING>,
+ <&intc GIC_SPI 466 IRQ_TYPE_EDGE_RISING>,
+ <&intc GIC_SPI 497 IRQ_TYPE_EDGE_RISING>,
+ <&intc GIC_SPI 454 IRQ_TYPE_EDGE_RISING>,
+ <&intc GIC_SPI 453 IRQ_TYPE_EDGE_RISING>,
+ <&intc GIC_SPI 452 IRQ_TYPE_EDGE_RISING>,
+ <&intc GIC_SPI 451 IRQ_TYPE_EDGE_RISING>,
+ <&intc GIC_SPI 488 IRQ_TYPE_EDGE_RISING>,
+ <&intc GIC_SPI 488 IRQ_TYPE_EDGE_RISING>,
+ <&intc GIC_SPI 484 IRQ_TYPE_EDGE_RISING>,
+ <&intc GIC_SPI 554 IRQ_TYPE_EDGE_RISING>,
+ <&intc GIC_SPI 554 IRQ_TYPE_EDGE_RISING>,
+ <&intc GIC_SPI 549 IRQ_TYPE_EDGE_RISING>,
+ <&intc GIC_SPI 507 IRQ_TYPE_EDGE_RISING>,
+ <&intc GIC_SPI 500 IRQ_TYPE_EDGE_RISING>,
+ <&intc GIC_SPI 499 IRQ_TYPE_EDGE_RISING>,
+ <&intc GIC_SPI 498 IRQ_TYPE_EDGE_RISING>,
+ <&intc GIC_SPI 450 IRQ_TYPE_EDGE_RISING>,
+ <&intc GIC_SPI 449 IRQ_TYPE_EDGE_RISING>,
+ <&intc GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+ <&intc GIC_SPI 447 IRQ_TYPE_EDGE_RISING>,
+ <&intc GIC_SPI 543 IRQ_TYPE_EDGE_RISING>,
+ <&intc GIC_SPI 486 IRQ_TYPE_EDGE_RISING>,
+ <&intc GIC_SPI 486 IRQ_TYPE_EDGE_RISING>,
+ <&intc GIC_SPI 482 IRQ_TYPE_EDGE_RISING>,
+ <&intc GIC_SPI 419 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "ready",
+ "spawn",
+ "stop-ack",
+ "misc-pulse1",
+ "misc-latch",
+ "sw-exception",
+ "ce0",
+ "ce1",
+ "ce2",
+ "ce3",
+ "ce4",
+ "ce5",
+ "ce6",
+ "ce7",
+ "ce8",
+ "ce9",
+ "ce10",
+ "ce11",
+ "host2wbm-desc-feed",
+ "host2reo-re-injection",
+ "host2reo-command",
+ "host2rxdma-monitor-ring1",
+ "reo2ost-exception",
+ "wbm2host-rx-release",
+ "reo2host-status",
+ "reo2host-destination-ring4",
+ "reo2host-destination-ring3",
+ "reo2host-destination-ring2",
+ "reo2host-destination-ring1",
+ "rxdma2host-monitor-destination-mac3",
+ "rxdma2host-monitor-destination-mac2",
+ "rxdma2host-monitor-destination-mac1",
+ "host2rxdma-host-buf-ring-mac3",
+ "host2rxdma-host-buf-ring-mac2",
+ "host2rxdma-host-buf-ring-mac1",
+ "host2tcl-input-ring4",
+ "host2tcl-input-ring3",
+ "host2tcl-input-ring2",
+ "host2tcl-input-ring1",
+ "wbm2host-tx-completions-ring4",
+ "wbm2host-tx-completions-ring3",
+ "wbm2host-tx-completions-ring2",
+ "wbm2host-tx-completions-ring1",
+ "host2tx-monitor-ring1",
+ "txmon2host-monitor-destination-mac3",
+ "txmon2host-monitor-destination-mac2",
+ "txmon2host-monitor-destination-mac1",
+ "umac_reset";
+
+ memory-region = <&q6_region>;
+ qcom,rproc = <&q6v5_wcss>;
+ qcom,smem-states = <&wcss_smp2p_out 8>,
+ <&wcss_smp2p_out 9>,
+ <&wcss_smp2p_out 10>;
+ qcom,smem-state-names = "shutdown",
+ "stop",
+ "spawn";
+ };
--
2.34.1