[PATCH v2 0/5] Add Exynos990 pinctrl and chipid drivers

[Igor Belwon]

Hi folks,

This series adds support for the drivers for the Exynos 990 SoC. It
consists of the pinctrl driver and the chipid driver. The product ID
of this chip for chipid is 0xe9830000. The pinctrl bank types are the
same as in the Exynos 850 chip.

Changes in v2:
 - Moved bindings from SoC bringup commit
 - Moved device tree changes from SoC bringup commit
 - Ordered pinctrl nodes by unit address in SoC DT
 - Moved the exynos990-wakeup-eint binding to the correct if.
 - Added pinctrl aliases to SoC DT.

Kind regards,
Igor

Igor Belwon (5):
  dt-bindings: pinctrl: samsung: Add exynos990-pinctrl compatible
  dt-bindings: pinctrl: samsung: add exynos990-wakeup-eint compatible
  pinctrl: samsung: Add Exynos 990 SoC pinctrl configuration
  arm64: dts: exynos: Add Exynos 990 pinctrl nodes
  arm64: dts: exynos: Add button support for c1s

 .../samsung,pinctrl-wakeup-interrupt.yaml     |    1 +
 .../bindings/pinctrl/samsung,pinctrl.yaml     |    1 +
 arch/arm64/boot/dts/exynos/exynos990-c1s.dts  |   49 +
 .../boot/dts/exynos/exynos990-pinctrl.dtsi    | 2195 +++++++++++++++++
 arch/arm64/boot/dts/exynos/exynos990.dtsi     |   57 +
 .../pinctrl/samsung/pinctrl-exynos-arm64.c    |  140 ++
 drivers/pinctrl/samsung/pinctrl-samsung.c     |    2 +
 drivers/pinctrl/samsung/pinctrl-samsung.h     |    1 +
 8 files changed, 2446 insertions(+)
 create mode 100644 arch/arm64/boot/dts/exynos/exynos990-pinctrl.dtsi

-- 
2.45.2