Re: [RFC PATCH v2 2/3] dt-bindings: crypto: Add Inside Secure SafeXcel EIP-93 crypto engine

[Christian Marangi]

On Thu, Oct 17, 2024 at 10:23:54AM +0200, Krzysztof Kozlowski wrote:
> On Thu, Oct 17, 2024 at 02:43:18AM +0200, Christian Marangi wrote:
>  +
> > +description: |
> > +  The Inside Secure SafeXcel EIP-93 is a cryptographic engine IP block
> > +  integrated in varios devices with very different and generic name from
> > +  PKTE to simply vendor+EIP93. The real IP under the hood is actually
> > +  developed by Inside Secure and given to license to vendors.
> > +
> > +  The IP block is sold with different model based on what feature are
> > +  needed and are identified with the final letter. Each letter correspond
> > +  to a specific set of feature and multiple letter reflect the sum of the
> > +  feature set.
> 
> You write it is licensed to vendors, so are you sure these could be
> used alone, without vendor customizations/hookups etc? I think you
> should have a dedicated, SoC-specific compatible in the front. I am not
> sure if this was discussed already, though.

Yes in v1, Rob asked some info about the compatible that was
mediatek,mtk-eip93 or airoha,mtk-eip93.

The thing is that from what I checked from different documentation
around, the register map and how the thing works doesn't change across
vendors, what I have seen is at max specific register added that are
outside of the crypto module usage (example debug register for BUS
bandwidth)

Any suggestion on what could be a good compatible? Honestly I'm more
tempted of using this similar to how is done by the new model EIP197.

> > +
> > +  EIP-93 models:
> > +    - EIP-93i: (basic) DES/Triple DES, AES, PRNG, IPsec ESP, SRTP, SHA1
> > +    - EIP-93ie: i + SHA224/256, AES-192/256
> > +    - EIP-93is: i + SSL/DTLS/DTLS, MD5, ARC4
> > +    - EIP-93ies: i + e + s
> > +    - EIP-93iw: i + AES-XCB-MAC, AES-CCM
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - inside-secure,safexcel-eip93i
> > +      - inside-secure,safexcel-eip93ie
> > +      - inside-secure,safexcel-eip93is
> > +      - inside-secure,safexcel-eip93ies
> > +      - inside-secure,safexcel-eip93iw
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +
> > +    crypto@1e004000 {
> > +      compatible = "inside-secure,safexcel-eip93ies";
> > +      reg = <0x1fb70000 0x1000>;
> 
> Looks like not matching unit address.
>

Yes sorry a typo, will fix in v3.

-- 
	Ansuel