Re: [PATCH v4 3/6] iio: adc: adi-axi-adc: add interface type

[David Lechner]

On 10/18/24 5:42 AM, Antoniu Miclaus wrote:
> Add support for getting the interface (CMOS or LVDS) used by the AXI ADC
> IP.
> 
> Signed-off-by: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
> ---

...

> +static int axi_adc_interface_type_get(struct iio_backend *back,
> +				      enum iio_backend_interface_type *type)
> +{
> +	struct adi_axi_adc_state *st = iio_backend_get_priv(back);
> +	unsigned int val;
> +	int ret;
> +
> +	ret = regmap_read(st->regmap, ADI_AXI_ADC_REG_CONFIG, &val);
> +	if (ret)
> +		return ret;
> +
> +	if (val & ADI_AXI_ADC_REG_CONFIG_CMOS_OR_LVDS_N)
> +		*type = IIO_BACKEND_INTERFACE_CMOS;
> +	else
> +		*type = IIO_BACKEND_INTERFACE_LVDS;

These should be the more specific IIO_BACKEND_INTERFACE_SERIAL_CMOS
and IIO_BACKEND_INTERFACE_SERIAL_LVDS.

> +
> +	return 0;
> +}
> +
>  static struct iio_buffer *axi_adc_request_buffer(struct iio_backend *back,
>  						 struct iio_dev *indio_dev)
>  {
> @@ -285,6 +307,7 @@ static const struct iio_backend_ops adi_axi_adc_generic = {
>  	.iodelay_set = axi_adc_iodelays_set,
>  	.test_pattern_set = axi_adc_test_pattern_set,
>  	.chan_status = axi_adc_chan_status,
> +	.interface_type_get = axi_adc_interface_type_get,
>  };
>  
>  static int adi_axi_adc_probe(struct platform_device *pdev)