[PATCH v1 1/1] arm64: dts: layerscape: remove en25s64 and only keep jedec,spi-nor compatible string

[Frank Li]

In jedec,spi-nor.yaml:
  SPI NOR flashes compatible with the JEDEC SFDP standard or which may be
  identified with the READ ID opcode (0x9F) do not deserve a specific
  compatible. They should instead only be matched against the generic
  "jedec,spi-nor" compatible.

en25s64 already in drivers/mtd/spi-nor/eon.c. So remove it safely and fix
below warning:
  arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dtb: flash@2: compatible: 'oneOf' conditional failed, one must be fixed:
        ['en25s64', 'jedec,spi-nor'] is too long

Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
---
 arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts | 2 +-
 arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
index bbdf989058ff7..ce59b94d8c228 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
@@ -87,7 +87,7 @@ flash@1 {
 	flash@2 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "en25s64", "jedec,spi-nor";
+		compatible = "jedec,spi-nor";
 		spi-cpol;
 		spi-cpha;
 		reg = <2>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
index a1d9102ff32be..736722b58e77f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
@@ -69,7 +69,7 @@ flash@1 {
 	flash@2 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "en25s64", "jedec,spi-nor";
+		compatible = "jedec,spi-nor";
 		spi-cpol;
 		spi-cpha;
 		reg = <2>;
-- 
2.34.1