Re: [PATCH v4 08/12] arm64: dts: renesas: r9a08g045: Add VBATTB node

[Geert Uytterhoeven]

Hi Claudiu,

On Sat, Oct 19, 2024 at 10:48 AM Claudiu <claudiu.beznea@xxxxxxxxx> wrote:
> From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
>
> Add the DT node for the VBATTB IP along with DT bindings for the clock
> it provides.
>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
> ---
>
> Changes in v4:
> - used clock-controller for the vbattb node name
> - move the node near scif0 for ordering

Thanks for the update!

> - set the vbattb_xtal status as disabled to avoid having it exported
>   in linux with frequency = 0 in boards that don't use it

That is expected, and perfectly fine.
The clock is referenced from the vbattb node, so IMHO it should not
be disabled.

> - collected tags

> --- a/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
> @@ -72,6 +72,18 @@ scif0: serial@1004b800 {
>                         status = "disabled";
>                 };
>
> +               vbattb: clock-controller@1005c000 {
> +                       compatible = "renesas,r9a08g045-vbattb";
> +                       reg = <0 0x1005c000 0 0x1000>;
> +                       interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
> +                       clocks = <&cpg CPG_MOD R9A08G045_VBAT_BCLK>, <&vbattb_xtal>;
> +                       clock-names = "bclk", "rtx";
> +                       #clock-cells = <1>;
> +                       power-domains = <&cpg>;
> +                       resets = <&cpg R9A08G045_VBAT_BRESETN>;
> +                       status = "disabled";
> +               };
> +
>                 i2c0: i2c@10090000 {
>                         compatible = "renesas,riic-r9a08g045", "renesas,riic-r9a09g057";
>                         reg = <0 0x10090000 0 0x400>;
> @@ -425,4 +437,12 @@ timer {
>                 interrupt-names = "sec-phys", "phys", "virt", "hyp-phys",
>                                   "hyp-virt";
>         };
> +
> +       vbattb_xtal: vbattb-xtal {
> +               compatible = "fixed-clock";
> +               #clock-cells = <0>;
> +               /* This value must be overridden by the board. */
> +               clock-frequency = <0>;
> +               status = "disabled";

Hence please drop this line.

> +       };
>  };

Gr{oetje,eeting}s,

                        Geert


--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds