Re: [PATCH v2 2/3] dt-bindings: iio: magnetometer: document the Allegro MicroSystems ALS31300 3-D Linear Hall Effect Sensor

[Rob Herring (Arm)]

On Mon, 21 Oct 2024 14:38:54 +0200, Neil Armstrong wrote:
> Document the bindings for the Allegro MicroSystems ALS31300 3-D Linear
> Hall Effect Sensor controller by an I2C interface, mainly used in 3D
> head-on motion sensing applications.
> 
> The device can be configured with different sensitivities in factory,
> but the sensitivity value used to calculate value into the Gauss unit
> is not available from registers, thus the sensitivity is provided by
> the compatible/device-id string which is based on the part number as
> described in the datasheet page 2.
> 
> Datasheet: https://www.allegromicro.com/-/media/files/datasheets/als31300-datasheet.pdf
> Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
> ---
>  .../iio/magnetometer/allegromicro,als31300.yaml    | 46 ++++++++++++++++++++++
>  1 file changed, 46 insertions(+)
> 

Reviewed-by: Rob Herring (Arm) <robh@xxxxxxxxxx>