Re: [PATCH v2 2/2] usb: typec: mux: Add support for the TUSB1046 crosspoint switch

From: Dmitry Baryshkov
Date: Fri Oct 25 2024 - 06:29:53 EST


On Fri, Oct 25, 2024 at 09:09:11AM +0200, Romain Gantois wrote:
> Hello Dmitry,
>
> On vendredi 25 octobre 2024 08:39:54 UTC+2 Dmitry Baryshkov wrote:
> > On Thu, Oct 24, 2024 at 10:54:17AM +0200, Romain Gantois wrote:
> ...
> > > +
> > > +static int tusb1046_mux_set(struct typec_mux_dev *mux,
> > > + struct typec_mux_state *state)
> > > +{
> > > + struct tusb1046_priv *priv = typec_mux_get_drvdata(mux);
> > > + struct i2c_client *client = priv->client;
> > > + struct device *dev = &client->dev;
> > > + int mode, val, ret = 0;
> > > +
> > > + if (state->mode >= TYPEC_STATE_MODAL &&
> > > + state->alt->svid != USB_TYPEC_DP_SID)
> > > + return -EINVAL;
> > > +
> > > + dev_dbg(dev, "mux mode requested: %lu\n", state->mode);
> > > +
> > > + mutex_lock(&priv->general_reg_lock);
> > > +
> > > + val = i2c_smbus_read_byte_data(client, TUSB1046_REG_GENERAL);
> > > + if (val < 0) {
> > > + dev_err(dev, "failed to read ctlsel status, err %d\n", val);
> > > + ret = val;
> > > + goto out_unlock;
> > > + }
> > > +
> > > + switch (state->mode) {
> > > + case TYPEC_STATE_USB:
> > > + mode = TUSB1046_CTLSEL_USB3;
> > > + break;
> >
> > > + case TYPEC_DP_STATE_C:
> > These are only valid if you have checked that altmode SVID is a
> > DisplayPort SVID.
>
> I did check it near the beginning of the function didn't I?
>
> > > + if (state->mode >= TYPEC_STATE_MODAL &&
> > > + state->alt->svid != USB_TYPEC_DP_SID)
> > > + return -EINVAL;
>
> Or is there something I'm missing?

Indeed, excuse me. I missed it.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>


>
> Thanks for the review,
>
> --
> Romain Gantois, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com
>
>
>

--
With best wishes
Dmitry