Re: [PATCH v4 08/10] PCI: brcmstb: Adjust PHY PLL setup to use a 54MHz input refclk

[Florian Fainelli]

On 10/25/24 05:45, Stanimir Varbanov wrote:
> The default input reference clock for the PHY PLL is 100Mhz, except for
> some devices where it is 54Mhz like bcm2712C1 and bcm2712D0.
>
> To implement this adjustments introduce a new .post_setup op in
> pcie_cfg_data and call it at the end of brcm_pcie_setup function.
>
> The bcm2712 .post_setup callback implements the required MDIO writes that
> switch the PLL refclk and also change PHY PM clock period.
>
> Without this RPi5 PCIex1 is unable to enumerate endpoint devices on
> the expansion connector.
>
> Signed-off-by: Stanimir Varbanov <svarbanov@xxxxxxx>

Reviewed-by: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
--
Florian