[PATCH 05/24] can: m_can: Switch to use hrtimer_setup()

[Nam Cao]

There is a newly introduced hrtimer_setup() which will replace
hrtimer_init(). This new function is similar to the old one, except that it
also sanity-checks and initializes the timer's callback function.

Switch to use this new function.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@xxxxxxxxxxxxx>
---
Cc: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
Cc: Jakub Kicinski <kuba@xxxxxxxxxx>
Cc: Paolo Abeni <pabeni@xxxxxxxxxx>
---
 drivers/net/can/m_can/m_can.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
index a978b960f1f1..183f6eceb7e9 100644
--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -2383,12 +2383,11 @@ int m_can_class_register(struct m_can_classdev *cdev)
 
 	if (!cdev->net->irq) {
 		dev_dbg(cdev->dev, "Polling enabled, initialize hrtimer");
-		hrtimer_init(&cdev->hrtimer, CLOCK_MONOTONIC,
-			     HRTIMER_MODE_REL_PINNED);
-		cdev->hrtimer.function = &hrtimer_callback;
+		hrtimer_setup(&cdev->hrtimer, &hrtimer_callback, CLOCK_MONOTONIC,
+			      HRTIMER_MODE_REL_PINNED);
 	} else {
-		hrtimer_init(&cdev->hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
-		cdev->hrtimer.function = m_can_coalescing_timer;
+		hrtimer_setup(&cdev->hrtimer, m_can_coalescing_timer, CLOCK_MONOTONIC,
+			      HRTIMER_MODE_REL);
 	}
 
 	ret = m_can_dev_setup(cdev);
-- 
2.39.5