Re: [PATCH net] net: enetc: set MAC address to the VF net_device

[Vladimir Oltean]

On Mon, Oct 28, 2024 at 04:52:42PM +0800, Wei Fang wrote:
> The MAC address of VF can be configured through the mailbox mechanism of
> ENETC, but the previous implementation forgot to set the MAC address in
> net_device, resulting in the SMAC of the sent frames still being the old
> MAC address. Since the MAC address in the hardware has been changed, Rx
> cannot receive frames with the DMAC address as the new MAC address. The
> most obvious phenomenon is that after changing the MAC address, we can
> see that the MAC address of eno0vf0 has not changed through the "ifconfig
> eno0vf0" commandand the IP address cannot be obtained .
> 
> root@ls1028ardb:~# ifconfig eno0vf0 down
> root@ls1028ardb:~# ifconfig eno0vf0 hw ether 00:04:9f:3a:4d:56 up
> root@ls1028ardb:~# ifconfig eno0vf0
> eno0vf0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
>         ether 66:36:2c:3b:87:76  txqueuelen 1000  (Ethernet)
>         RX packets 794  bytes 69239 (69.2 KB)
>         RX errors 0  dropped 0  overruns 0  frame 0
>         TX packets 11  bytes 2226 (2.2 KB)
>         TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
> 
> Fixes: beb74ac878c8 ("enetc: Add vf to pf messaging support")
> Signed-off-by: Wei Fang <wei.fang@xxxxxxx>
> ---

Reviewed-by: Vladimir Oltean <vladimir.oltean@xxxxxxx>