Re: [PATCH v2 2/2] dt-bindings: hwmon: pwm-fan: add retain-state-shutdown property
From: Akinobu Mita
Date: Mon Oct 28 2024 - 08:45:27 EST
2024年10月28日(月) 5:38 Krzysztof Kozlowski <krzk@xxxxxxxxxx>:
>
> On Sat, Oct 26, 2024 at 05:05:35PM +0900, Akinobu Mita wrote:
> > Document new retain-state-shutdown property.
> >
> > Cc: Jean Delvare <jdelvare@xxxxxxxx>
> > Cc: Guenter Roeck <linux@xxxxxxxxxxxx>
> > Cc: Rob Herring <robh@xxxxxxxxxx>
> > Cc: Krzysztof Kozlowski <krzk+dt@xxxxxxxxxx>
> > Cc: Conor Dooley <conor+dt@xxxxxxxxxx>
> > Cc: Billy Tsai <billy_tsai@xxxxxxxxxxxxxx>
> > Signed-off-by: Akinobu Mita <akinobu.mita@xxxxxxxxx>
> > ---
> > Documentation/devicetree/bindings/hwmon/pwm-fan.yaml | 4 ++++
> > 1 file changed, 4 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/hwmon/pwm-fan.yaml b/Documentation/devicetree/bindings/hwmon/pwm-fan.yaml
> > index 4e5abf7580cc..86a069969e29 100644
> > --- a/Documentation/devicetree/bindings/hwmon/pwm-fan.yaml
> > +++ b/Documentation/devicetree/bindings/hwmon/pwm-fan.yaml
> > @@ -40,6 +40,10 @@ properties:
> > maximum: 4
> > default: 2
> >
> > + retain-state-shutdown:
> > + description: Retain the state of the PWM on shutdown.
>
> You described the desired Linux feature or behavior, not the actual
> hardware. The bindings are about the latter, so instead you need to
> rephrase the property and its description to match actual hardware
> capabilities/features/configuration etc.
Is this description okay?
(Reused the description of retain-state-shutdown in leds-gpio.yaml)
description:
Retain the state of the PWM on shutdown. Useful in BMC systems, for
example, when the BMC is rebooted while the host remains up, the fan
will not stop.