RE: [PATCH v14 07/14] cxl/memfeature: Add CXL memory device patrol scrub control feature

[Shiju Jose]

>-----Original Message-----
>From: Dave Jiang <dave.jiang@xxxxxxxxx>
>Sent: 29 October 2024 16:32
>To: Shiju Jose <shiju.jose@xxxxxxxxxx>; linux-edac@xxxxxxxxxxxxxxx; linux-
>cxl@xxxxxxxxxxxxxxx; linux-acpi@xxxxxxxxxxxxxxx; linux-mm@xxxxxxxxx; linux-
>kernel@xxxxxxxxxxxxxxx
>Cc: bp@xxxxxxxxx; tony.luck@xxxxxxxxx; rafael@xxxxxxxxxx; lenb@xxxxxxxxxx;
>mchehab@xxxxxxxxxx; dan.j.williams@xxxxxxxxx; dave@xxxxxxxxxxxx; Jonathan
>Cameron <jonathan.cameron@xxxxxxxxxx>; gregkh@xxxxxxxxxxxxxxxxxxx;
>sudeep.holla@xxxxxxx; jassisinghbrar@xxxxxxxxx; alison.schofield@xxxxxxxxx;
>vishal.l.verma@xxxxxxxxx; ira.weiny@xxxxxxxxx; david@xxxxxxxxxx;
>Vilas.Sridharan@xxxxxxx; leo.duran@xxxxxxx; Yazen.Ghannam@xxxxxxx;
>rientjes@xxxxxxxxxx; jiaqiyan@xxxxxxxxxx; Jon.Grimm@xxxxxxx;
>dave.hansen@xxxxxxxxxxxxxxx; naoya.horiguchi@xxxxxxx;
>james.morse@xxxxxxx; jthoughton@xxxxxxxxxx; somasundaram.a@xxxxxxx;
>erdemaktas@xxxxxxxxxx; pgonda@xxxxxxxxxx; duenwen@xxxxxxxxxx;
>gthelen@xxxxxxxxxx; wschwartz@xxxxxxxxxxxxxxxxxxx;
>dferguson@xxxxxxxxxxxxxxxxxxx; wbs@xxxxxxxxxxxxxxxxxxxxxx;
>nifan.cxl@xxxxxxxxx; tanxiaofei <tanxiaofei@xxxxxxxxxx>; Zengtao (B)
><prime.zeng@xxxxxxxxxxxxx>; Roberto Sassu <roberto.sassu@xxxxxxxxxx>;
>kangkang.shen@xxxxxxxxxxxxx; wanghuiqiang <wanghuiqiang@xxxxxxxxxx>;
>Linuxarm <linuxarm@xxxxxxxxxx>
>Subject: Re: [PATCH v14 07/14] cxl/memfeature: Add CXL memory device patrol
>scrub control feature
>
>
>
>On 10/25/24 10:13 AM, shiju.jose@xxxxxxxxxx wrote:
>> From: Shiju Jose <shiju.jose@xxxxxxxxxx>
>>
>> CXL spec 3.1 section 8.2.9.9.11.1 describes the device patrol scrub
>> control feature. The device patrol scrub proactively locates and makes
>> corrections to errors in regular cycle.
>>
>> Allow specifying the number of hours within which the patrol scrub
>> must be completed, subject to minimum and maximum limits reported by the
>device.
>> Also allow disabling scrub allowing trade-off error rates against
>> performance.
>>
>> Add support for patrol scrub control on CXL memory devices.
>> Register with the EDAC device driver, which retrieves the scrub
>> attribute descriptors from EDAC scrub and exposes the sysfs scrub
>> control attributes to userspace. For example, scrub control for the
>> CXL memory device "cxl_mem0" is exposed in
>/sys/bus/edac/devices/cxl_mem0/scrubX/.
>>
>> Additionally, add support for region-based CXL memory patrol scrub control.
>> CXL memory regions may be interleaved across one or more CXL memory
>> devices. For example, region-based scrub control for "cxl_region1" is
>> exposed in /sys/bus/edac/devices/cxl_region1/scrubX/.
>>
>> Co-developed-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
>> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
>> Signed-off-by: Shiju Jose <shiju.jose@xxxxxxxxxx>
>> ---
>>  Documentation/edac/edac-scrub.rst |  74 ++++++
>>  drivers/cxl/Kconfig               |  18 ++
>>  drivers/cxl/core/Makefile         |   1 +
>>  drivers/cxl/core/memfeature.c     | 381 ++++++++++++++++++++++++++++++
>>  drivers/cxl/core/region.c         |   6 +
>>  drivers/cxl/cxlmem.h              |   7 +
>>  drivers/cxl/mem.c                 |   4 +
>>  7 files changed, 491 insertions(+)
>>  create mode 100644 Documentation/edac/edac-scrub.rst  create mode
>> 100644 drivers/cxl/core/memfeature.c
>>
>> diff --git a/Documentation/edac/edac-scrub.rst
>> b/Documentation/edac/edac-scrub.rst
>> new file mode 100644
>> index 000000000000..4aad4974b208
>> --- /dev/null
>> +++ b/Documentation/edac/edac-scrub.rst
>> @@ -0,0 +1,74 @@
>> +.. SPDX-License-Identifier: GPL-2.0
>> +
[...]

>> +static int cxl_mem_ps_get_attrs(struct cxl_memdev_state *mds,
>> +				struct cxl_memdev_ps_params *params) {
>> +	size_t rd_data_size = sizeof(struct cxl_memdev_ps_rd_attrs);
>> +	size_t data_size;
>> +	struct cxl_memdev_ps_rd_attrs *rd_attrs __free(kfree) =
>> +						kmalloc(rd_data_size,
>GFP_KERNEL);
>> +	if (!rd_attrs)
>> +		return -ENOMEM;
>> +
>> +	data_size = cxl_get_feature(mds, cxl_patrol_scrub_uuid,
>> +				    CXL_GET_FEAT_SEL_CURRENT_VALUE,
>> +				    rd_attrs, rd_data_size);
>> +	if (!data_size)
>> +		return -EIO;
>> +
>> +	params->scrub_cycle_changeable =
>FIELD_GET(CXL_MEMDEV_PS_SCRUB_CYCLE_CHANGE_CAP_MASK,
>> +						   rd_attrs->scrub_cycle_cap);
>> +	params->enable =
>FIELD_GET(CXL_MEMDEV_PS_FLAG_ENABLED_MASK,
>> +				   rd_attrs->scrub_flags);
>> +	params->scrub_cycle_hrs =
>FIELD_GET(CXL_MEMDEV_PS_CUR_SCRUB_CYCLE_MASK,
>> +					    rd_attrs->scrub_cycle_hrs);
>> +	params->min_scrub_cycle_hrs =
>FIELD_GET(CXL_MEMDEV_PS_MIN_SCRUB_CYCLE_MASK,
>> +						rd_attrs->scrub_cycle_hrs);
>> +
>> +	return 0;
>> +}
>> +
>> +static int cxl_ps_get_attrs(struct device *dev, void *drv_data,
>
>Would a union be better than a void *drv_data for all the places this is used as a
>parameter? How many variations of this are there?
>
>DJ
Hi Dave,

Can you give more info on this given this is a generic callback for the scrub control and each
implementation will have its own context struct (for eg. struct cxl_patrol_scrub_context here
for CXL scrub control), which in turn will be passed in and out as opaque data.

Thanks,
Shiju
>
>> +			    struct cxl_memdev_ps_params *params) {
>> +	struct cxl_patrol_scrub_context *cxl_ps_ctx = drv_data;
>> +	struct cxl_memdev *cxlmd;
>> +	struct cxl_dev_state *cxlds;
>> +	struct cxl_memdev_state *mds;
>> +	u16 min_scrub_cycle = 0;
>> +	int i, ret;
>> +
>> +	if (cxl_ps_ctx->cxlr) {
>> +		struct cxl_region *cxlr = cxl_ps_ctx->cxlr;
>> +		struct cxl_region_params *p = &cxlr->params;
>> +
>> +		for (i = p->interleave_ways - 1; i >= 0; i--) {
>> +			struct cxl_endpoint_decoder *cxled = p->targets[i];
>> +
>> +			cxlmd = cxled_to_memdev(cxled);
>> +			cxlds = cxlmd->cxlds;
>> +			mds = to_cxl_memdev_state(cxlds);
>> +			ret = cxl_mem_ps_get_attrs(mds, params);
>> +			if (ret)
>> +				return ret;
>> +
>> +			if (params->min_scrub_cycle_hrs > min_scrub_cycle)
>> +				min_scrub_cycle = params-
>>min_scrub_cycle_hrs;
>> +		}
>> +		params->min_scrub_cycle_hrs = min_scrub_cycle;
>> +		return 0;
>> +	}
>> +	cxlmd = cxl_ps_ctx->cxlmd;
>> +	cxlds = cxlmd->cxlds;
>> +	mds = to_cxl_memdev_state(cxlds);
>> +
>> +	return cxl_mem_ps_get_attrs(mds, params); }
>> +
[...]
>