Re: [PATCH v4 1/6] media: dt-bindings: media: camss: Add qcom,sc7280-camss binding
From: Vladimir Zapolskiy
Date: Wed Oct 30 2024 - 07:11:10 EST
Hi Vikram,
On 10/30/24 12:53, Vikram Sharma wrote:
Add bindings for qcom,sc7280-camss to support the camera subsystem
on the SC7280 platform.
Signed-off-by: Suresh Vankadara <quic_svankada@xxxxxxxxxxx>
Signed-off-by: Trishansh Bhardwaj <quic_tbhardwa@xxxxxxxxxxx>
Signed-off-by: Vikram Sharma <quic_vikramsa@xxxxxxxxxxx>
---
<snip>
+required:
+ - clock-names
+ - clocks
+ - compatible
+ - interconnects
+ - interconnect-names
+ - interrupts
+ - interrupt-names
+ - iommus
+ - power-domains
+ - power-domains-names
+ - reg
+ - reg-names
+ - vdda-phy-supply
+ - vdda-pll-supply
These supplies shall be split into pad specific ones.
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,camcc-sc7280.h>
+ #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+ #include <dt-bindings/interconnect/qcom,sc7280.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ camss: camss@acaf000 {
Unit address is not the first one from the list of addresses from,
reg values nor it even in the list.
I kindly suggest to sort the list of reg values in address increase
order, this will immediately make visible problems of this type.
+ compatible = "qcom,sc7280-camss";
+
+ clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
+ <&clock_camcc CAM_CC_IFE_0_CSID_CLK>,
+ <&clock_camcc CAM_CC_IFE_1_CSID_CLK>,
+ <&clock_camcc CAM_CC_IFE_2_CSID_CLK>,
+ <&clock_camcc CAM_CC_IFE_LITE_0_CSID_CLK>,
+ <&clock_camcc CAM_CC_IFE_LITE_1_CSID_CLK>,
+ <&clock_camcc CAM_CC_CSIPHY0_CLK>,
+ <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK>,
+ <&clock_camcc CAM_CC_CSIPHY1_CLK>,
+ <&clock_camcc CAM_CC_CSI1PHYTIMER_CLK>,
+ <&clock_camcc CAM_CC_CSIPHY2_CLK>,
+ <&clock_camcc CAM_CC_CSI2PHYTIMER_CLK>,
+ <&clock_camcc CAM_CC_CSIPHY3_CLK>,
+ <&clock_camcc CAM_CC_CSI3PHYTIMER_CLK>,
+ <&clock_camcc CAM_CC_CSIPHY4_CLK>,
+ <&clock_camcc CAM_CC_CSI4PHYTIMER_CLK>,
+ <&gcc GCC_CAMERA_AHB_CLK>,
+ <&gcc GCC_CAMERA_HF_AXI_CLK>,
+ <&clock_camcc CAM_CC_CPAS_AHB_CLK>,
+ <&clock_camcc CAM_CC_IFE_0_AXI_CLK>,
+ <&clock_camcc CAM_CC_IFE_0_CLK>,
+ <&clock_camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
+ <&clock_camcc CAM_CC_IFE_1_AXI_CLK>,
+ <&clock_camcc CAM_CC_IFE_1_CLK>,
+ <&clock_camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
+ <&clock_camcc CAM_CC_IFE_2_AXI_CLK>,
+ <&clock_camcc CAM_CC_IFE_2_CLK>,
+ <&clock_camcc CAM_CC_IFE_2_CPHY_RX_CLK>,
+ <&clock_camcc CAM_CC_IFE_LITE_0_CLK>,
+ <&clock_camcc CAM_CC_IFE_LITE_0_CPHY_RX_CLK>,
+ <&clock_camcc CAM_CC_IFE_LITE_1_CLK>,
+ <&clock_camcc CAM_CC_IFE_LITE_1_CPHY_RX_CLK>;
+
+ clock-names = "camnoc_axi",
+ "csi0",
+ "csi1",
+ "csi2",
+ "csi3",
+ "csi4",
+ "csiphy0",
+ "csiphy0_timer",
+ "csiphy1",
+ "csiphy1_timer",
+ "csiphy2",
+ "csiphy2_timer",
+ "csiphy3",
+ "csiphy3_timer",
+ "csiphy4",
+ "csiphy4_timer",
+ "gcc_camera_ahb",
+ "gcc_camera_axi",
+ "soc_ahb",
+ "vfe0_axi",
+ "vfe0",
+ "vfe0_cphy_rx",
+ "vfe1_axi",
+ "vfe1",
+ "vfe1_cphy_rx",
+ "vfe2_axi",
+ "vfe2",
+ "vfe2_cphy_rx",
+ "vfe0_lite",
+ "vfe0_lite_cphy_rx",
+ "vfe1_lite",
+ "vfe1_lite_cphy_rx";
+
+ interconnects = <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_CAMERA_CFG 0>,
+ <&mmss_noc MASTER_CAMNOC_HF 0 &mc_virt SLAVE_EBI1 0>;
+
+ interconnect-names = "ahb", "hf_0";
+
+ interrupts = <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 466 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 640 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 359 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 641 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 360 IRQ_TYPE_EDGE_RISING>;
+
+ interrupt-names = "csid0",
+ "csid1",
+ "csid2",
+ "csid_lite0",
+ "csid_lite1",
+ "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csiphy3",
+ "csiphy4",
+ "vfe0",
+ "vfe1",
+ "vfe2",
+ "vfe_lite0",
+ "vfe_lite1";
+
+ iommus = <&apps_smmu 0x800 0x4e0>;
+
+ power-domains = <&camcc CAM_CC_IFE_0_GDSC>,
+ <&camcc CAM_CC_IFE_1_GDSC>,
+ <&camcc CAM_CC_IFE_2_GDSC>,
+ <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+ power-domains-names = "ife0", "ife1", "ife2", "top";
+
+ reg = <0x0 0x0acb3000 0x0 0x1000>,
+ <0x0 0x0acba000 0x0 0x1000>,
+ <0x0 0x0acc1000 0x0 0x1000>,
+ <0x0 0x0acc8000 0x0 0x1000>,
+ <0x0 0x0accf000 0x0 0x1000>,
+ <0x0 0x0ace0000 0x0 0x2000>,
+ <0x0 0x0ace2000 0x0 0x2000>,
+ <0x0 0x0ace4000 0x0 0x2000>,
+ <0x0 0x0ace6000 0x0 0x2000>,
+ <0x0 0x0ace8000 0x0 0x2000>,
+ <0x0 0x0acaf000 0x0 0x4000>,
+ <0x0 0x0acb6000 0x0 0x4000>,
+ <0x0 0x0acbd000 0x0 0x4000>,
+ <0x0 0x0acc4000 0x0 0x4000>,
+ <0x0 0x0accb000 0x0 0x4000>;
+
+ reg-names = "csid0",
+ "csid1",
+ "csid2",
+ "csid_lite0",
+ "csid_lite1",
+ "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csiphy3",
+ "csiphy4",
+ "vfe0",
+ "vfe1",
+ "vfe2",
+ "vfe_lite0",
+ "vfe_lite1";
reg and reg-names properties come right after the compatible property.
+
+ vdda-phy-supply = <&vreg_l10c_0p88>;
+ vdda-pll-supply = <&vreg_l6b_1p2>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+ };
--
Best wishes,
Vladimir