Re: [PATCH v9 4/4] i2c: Add driver for the RTL9300 I2C controller

[Chris Packham]

On 6/11/24 22:57, Andi Shyti wrote:
> Hi Chris,
>
> On Wed, Nov 06, 2024 at 01:18:35PM +1300, Chris Packham wrote:
> > Add support for the I2C controller on the RTL9300 SoC. There are two I2C
> > controllers in the RTL9300 that are part of the Ethernet switch register
> > block. Each of these controllers owns a SCL pin (GPIO8 for the fiorst
> > I2C controller, GPIO17 for the second). There are 8 possible SDA pins
> > (GPIO9-16) that can be assigned to either I2C controller. This
> > relationship is represented in the device tree with a child node for
> > each SDA line in use.
> >
> > This is based on the openwrt implementation[1] but has been
> > significantly modified
> >
> > [1] - https://scanmail.trustwave.com/?c=20988&d=pL2r5zHAPsW8d92uECdR2T8Eh4fYX_ZwrCyklfTCzQ&u=https%3a%2f%2fgit%2eopenwrt%2eorg%2f%3fp%3dopenwrt%2fopenwrt%2egit%3ba%3dblob%3bf%3dtarget%2flinux%2frealtek%2ffiles-5%2e15%2fdrivers%2fi2c%2fbusses%2fi2c-rtl9300%2ec
> >
> > Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
> > Reviewed-by: Andi Shyti <andi.shyti@xxxxxxxxxx>
> Thanks for following up with v9. I think nothing prevents us from
> already merging this 4/4 patch, right?
From my end yes it's all good to go. Lee's just applied the mfd binding.

The only thing outstanding are the mips dts changes. I'll wait for a bit 
and chase those up. Hopefully they can make it in the 6.13 window but 
it's not the end of the world if they don't.