Re: [PATCH 1/2] ASoC: dt-bindings: add stm32mp25 support for i2s

[Krzysztof Kozlowski]

On Wed, Nov 06, 2024 at 04:25:27PM +0100, Olivier Moysan wrote:
> Add STM32MP25 support for STM32 I2S peripheral,
> through "st,stm32mp25-i2s" compatible.
> 
> Signed-off-by: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
> ---
>  .../bindings/sound/st,stm32-i2s.yaml          | 60 +++++++++++++++----
>  1 file changed, 47 insertions(+), 13 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml b/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml
> index 8978f6bd63e5..8f08f1f28a1b 100644
> --- a/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml
> +++ b/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml
> @@ -13,13 +13,11 @@ description:
>    The SPI/I2S block supports I2S/PCM protocols when configured on I2S mode.
>    Only some SPI instances support I2S.
>  
> -allOf:
> -  - $ref: dai-common.yaml#
> -
>  properties:
>    compatible:
>      enum:
>        - st,stm32h7-i2s
> +      - st,stm32mp25-i2s
>  
>    "#sound-dai-cells":
>      const: 0
> @@ -28,18 +26,12 @@ properties:
>      maxItems: 1
>  
>    clocks:
> -    items:
> -      - description: clock feeding the peripheral bus interface.
> -      - description: clock feeding the internal clock generator.
> -      - description: I2S parent clock for sampling rates multiple of 8kHz.
> -      - description: I2S parent clock for sampling rates multiple of 11.025kHz.
> +    minItems: 2

Keep old list and just add minItms here

> +    maxItems: 4
>  
>    clock-names:
> -    items:
> -      - const: pclk
> -      - const: i2sclk
> -      - const: x8k
> -      - const: x11k
> +    minItems: 2

Ditto

> +    maxItems: 4
>  
>    interrupts:
>      maxItems: 1
> @@ -79,6 +71,48 @@ required:
>    - dmas
>    - dma-names
>  
> +allOf:
> +  - $ref: dai-common.yaml#
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: st,stm32h7-i2s
> +
> +    then:
> +      properties:
> +        clocks:
> +          items:
> +            - description: clock feeding the peripheral bus interface.
> +            - description: clock feeding the internal clock generator.
> +            - description: I2S parent clock for sampling rates multiple of 8kHz.
> +            - description: I2S parent clock for sampling rates multiple of 11.025kHz.

Instead: minItems: 4

> +
> +        clock-names:
> +          items:
> +            - const: pclk
> +            - const: i2sclk
> +            - const: x8k
> +            - const: x11k

ditto

> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: st,stm32mp25-i2s
> +
> +    then:
> +      properties:
> +        clocks:
> +          items:
> +            - description: clock feeding the peripheral bus interface.
> +            - description: clock feeding the internal clock generator.

instead: maxItems: 2

> +
> +        clock-names:
> +          items:
> +            - const: pclk
> +            - const: i2sclk

ditto

Thanks to this you keep the lists synchronized between variants - they
share the items.

Best regards,
Krzysztof