Re: [PATCH V1 2/3] mmc: sdhci-msm: Enable tuning for SDR50 mode for SD card

From: Adrian Hunter
Date: Mon Nov 11 2024 - 03:51:31 EST


On 7/11/24 10:05, Sarthak Garg wrote:
> For Qualcomm SoCs which needs level shifter for SD card, extra delay is
> seen on receiver data path.
>
> To compensate this delay enable tuning for SDR50 mode for targets which
> has level shifter.
>
> Signed-off-by: Sarthak Garg <quic_sartgarg@xxxxxxxxxxx>
> ---
> drivers/mmc/host/sdhci-msm.c | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
> index e00208535bd1..16325c21de52 100644
> --- a/drivers/mmc/host/sdhci-msm.c
> +++ b/drivers/mmc/host/sdhci-msm.c
> @@ -81,6 +81,7 @@
> #define CORE_IO_PAD_PWR_SWITCH_EN BIT(15)
> #define CORE_IO_PAD_PWR_SWITCH BIT(16)
> #define CORE_HC_SELECT_IN_EN BIT(18)
> +#define CORE_HC_SELECT_IN_SDR50 (4 << 19)
> #define CORE_HC_SELECT_IN_HS400 (6 << 19)
> #define CORE_HC_SELECT_IN_MASK (7 << 19)
>
> @@ -1124,6 +1125,10 @@ static bool sdhci_msm_is_tuning_needed(struct sdhci_host *host)
> {
> struct mmc_ios *ios = &host->mmc->ios;
>
> + if (ios->timing == MMC_TIMING_UHS_SDR50 &&
> + host->flags & SDHCI_SDR50_NEEDS_TUNING)

Please do line up code as suggested by checkpatch:

CHECK: Alignment should match open parenthesis
#35: FILE: drivers/mmc/host/sdhci-msm.c:1129:
+ if (ios->timing == MMC_TIMING_UHS_SDR50 &&
+ host->flags & SDHCI_SDR50_NEEDS_TUNING)

CHECK: Alignment should match open parenthesis
#55: FILE: drivers/mmc/host/sdhci-msm.c:1219:
+ if (ios.timing == MMC_TIMING_UHS_SDR50 &&
+ host->flags & SDHCI_SDR50_NEEDS_TUNING) {

total: 0 errors, 0 warnings, 2 checks, 40 lines checked


> + return true;
> +
> /*
> * Tuning is required for SDR104, HS200 and HS400 cards and
> * if clock frequency is greater than 100MHz in these modes.
> @@ -1192,6 +1197,8 @@ static int sdhci_msm_execute_tuning(struct mmc_host *mmc, u32 opcode)
> struct mmc_ios ios = host->mmc->ios;
> struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
> + const struct sdhci_msm_offset *msm_offset = msm_host->offset;
> + u32 config;
>
> if (!sdhci_msm_is_tuning_needed(host)) {
> msm_host->use_cdr = false;
> @@ -1208,6 +1215,15 @@ static int sdhci_msm_execute_tuning(struct mmc_host *mmc, u32 opcode)
> */
> msm_host->tuning_done = 0;
>
> + if (ios.timing == MMC_TIMING_UHS_SDR50 &&
> + host->flags & SDHCI_SDR50_NEEDS_TUNING) {

Ditto alignment

> + config = readl_relaxed(host->ioaddr + msm_offset->core_vendor_spec);
> + config |= CORE_HC_SELECT_IN_EN;
> + config &= ~CORE_HC_SELECT_IN_MASK;
> + config |= CORE_HC_SELECT_IN_SDR50;

Perhaps clear bits first, then set bits e.g.

config &= ~CORE_HC_SELECT_IN_MASK;
config |= CORE_HC_SELECT_IN_EN | CORE_HC_SELECT_IN_SDR50;

> + writel_relaxed(config, host->ioaddr + msm_offset->core_vendor_spec);
> + }
> +
> /*
> * For HS400 tuning in HS200 timing requires:
> * - select MCLK/2 in VENDOR_SPEC