Re: [PATCH can-next v4 1/2] dt-bindings: can: tcan4x5x: Document the ti,nwkrq-voltage-vio option

From: Marc Kleine-Budde
Date: Thu Nov 14 2024 - 04:25:24 EST


On 14.11.2024 09:52:21, Sean Nyekjaer wrote:
> The nWKRQ pin supports an output voltage of either the internal reference
> voltage (3.6V) or the reference voltage of
> the digital interface 0-6V (VIO).
> Add the devicetree option ti,nwkrq-voltage-vio to set it to VIO.
>
> If this property is omitted the reset default, the internal reference
> voltage, is used.
>
> Signed-off-by: Sean Nyekjaer <sean@xxxxxxxxxx>

Reviewed-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>

regards,
Marc

> ---
> Documentation/devicetree/bindings/net/can/ti,tcan4x5x.yaml | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/net/can/ti,tcan4x5x.yaml b/Documentation/devicetree/bindings/net/can/ti,tcan4x5x.yaml
> index f1d18a5461e05296998ae9bf09bdfa1226580131..ff18cf7393550d1b7107b1233d8302203026579d 100644
> --- a/Documentation/devicetree/bindings/net/can/ti,tcan4x5x.yaml
> +++ b/Documentation/devicetree/bindings/net/can/ti,tcan4x5x.yaml
> @@ -106,6 +106,13 @@ properties:
> Must be half or less of "clocks" frequency.
> maximum: 18000000
>
> + ti,nwkrq-voltage-vio:
> + type: boolean
> + description:
> + nWKRQ Pin GPO buffer voltage configuration.
> + Set nWKRQ to use VIO voltage rail.
> + When not set nWKRQ will use internal voltage rail.
> +
> wakeup-source:
> $ref: /schemas/types.yaml#/definitions/flag
> description:
> @@ -157,6 +164,7 @@ examples:
> device-state-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
> device-wake-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
> reset-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
> + ti,nwkrq-voltage-vio;
> wakeup-source;
> };
> };
>
> --
> 2.46.2
>
>
>

--
Pengutronix e.K. | Marc Kleine-Budde |
Embedded Linux | https://www.pengutronix.de |
Vertretung Nürnberg | Phone: +49-5121-206917-129 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-9 |

Attachment: signature.asc
Description: PGP signature