Re: [PATCH v6 7/7] arm64: dts: qcom: ipq5424: Add thermal zone nodes

[Manikanta Mylavarapu]

On 11/12/2024 4:32 PM, Konrad Dybcio wrote:
> 
> 
> On 11-Nov-24 12:51, Manikanta Mylavarapu wrote:
>>
>>
>> On 11/7/2024 8:17 PM, Konrad Dybcio wrote:
>>> On 6.11.2024 11:25 AM, Manikanta Mylavarapu wrote:
>>>>
>>>>
>>>> On 11/6/2024 2:42 PM, Konrad Dybcio wrote:
>>>>>
>>>>>
>>>>> On 11/6/24 09:47, Manikanta Mylavarapu wrote:
>>>>>>
>>>>>>
>>>>>> On 11/4/2024 7:21 PM, Konrad Dybcio wrote:
>>>>>>> On 4.11.2024 1:44 PM, Manikanta Mylavarapu wrote:
>>>>>>>> Add thermal zone nodes for sensors present in IPQ5424.
>>>>>>>>
>>>>>>>> Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
>>>>>>>> ---
>>>>>>> [...]
>>>>>>>
>>>>>>>> +
>>>>>>>> +        cpu3-thermal {
>>>>>>>> +            polling-delay-passive = <0>;
>>>>>>>> +            polling-delay = <0>;
>>>>>>>> +            thermal-sensors = <&tsens 13>;
>>>>>>>> +
>>>>>>>> +            trips {
>>>>>>>> +                cpu-critical {
>>>>>>>> +                    temperature = <120000>;
>>>>>>>> +                    hysteresis = <9000>;
>>>>>>>> +                    type = "critical";
>>>>>>>> +                };
>>>>>>>> +
>>>>>>>> +                cpu-passive {
>>>>>>>> +                    temperature = <110000>;
>>>>>>>> +                    hysteresis = <9000>;
>>>>>>>> +                    type = "passive";
>>>>>>>
>>>>>>> You have a passive trip point without passive polling
>>>>>>>
>>>>>>
>>>>>> Okay, will remove this.
>>>>>
>>>>> You most likely want to preserve it, while keeping a sensible
>>>>> polling frequency, so that userspace will be aware of the current
>>>>> CPU temperature. <100> sounds like a sensible value here.
>>>>>
>>>>> Konrad
>>>>
>>>> Temperature sensor's present in IPQ5424 supports interrupts.
>>>
>>> Correct.
>>>
>>>> Hence no need to configure polling frequency.
>>>
>>> No, that interrupt firing signifies crossing the temp threshold (meaning
>>> no updates beyond that) or the tsens watchdog barking.
>>>
>>> Konrad
>>
>> An interrupt fires when the temperature crosses a threshold.
> 
> Which means you can't monitor the temperature at runtime
> without polling..
> 
> Konrad

Hi Konrad,

I got the point. Will configure polling-delay-passive with 100.

Thanks & Regards,
Manikanta.