[PATCH v5 03/16] spi: dt-bindings: add trigger-source.yaml

From: David Lechner
Date: Fri Nov 15 2024 - 15:19:50 EST


Add a new binding for SPI offload trigger sources.

Signed-off-by: David Lechner <dlechner@xxxxxxxxxxxx>
---

v5 changes:
* Add MAINTAINERS entry.

v4 changes: new patch in v4.

FWIW, this is essentially identical to the leds trigger-source binding.
---
.../devicetree/bindings/spi/trigger-source.yaml | 28 ++++++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 29 insertions(+)

diff --git a/Documentation/devicetree/bindings/spi/trigger-source.yaml b/Documentation/devicetree/bindings/spi/trigger-source.yaml
new file mode 100644
index 000000000000..d64367726af2
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/trigger-source.yaml
@@ -0,0 +1,28 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/trigger-source.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Trigger source providers for SPI offloads
+
+maintainers:
+ - David Lechner <dlechner@xxxxxxxxxxxx>
+
+description:
+ Each trigger source provider should be represented by a device tree node. It
+ may be e.g. a SPI peripheral chip or a clock source.
+
+properties:
+ '#trigger-source-cells':
+ description:
+ Number of cells in a source trigger. Typically 0 for nodes of simple
+ trigger sources. For nodes with more than one output signal, the first
+ cell be used to specify which output signal to use. If the same signal is
+ available on more than one pin, the second cell can be used to specify
+ which pin to use.
+ enum: [ 0, 1, 2 ]
+
+additionalProperties: true
+
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 75c8ca9a8584..91a4a7eb6194 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -22021,6 +22021,7 @@ F: include/linux/mtd/spi-nor.h

SPI OFFLOAD
R: David Lechner <dlechner@xxxxxxxxxxxx>
+F: Documentation/devicetree/bindings/spi/trigger-source.yaml
F: drivers/spi/spi-offload.c
F: include/linux/spi/spi-offload.h
K: spi_offload

--
2.43.0