Re: [PATCH 1/5] net: usb: qmi_wwan: add IDs for EM7565 (9X50) in "MBIM USBIF" config

[Lars Melin]

On 2024-11-17 15:31, Ivan Shapovalov wrote:
> This change was discovered and tested using author's own EM7565 device.
>
> This "MBIM USBIF" configuration corresponds to the `AT!USBCOMP=1,1,xxx`
> on-device USB composition setting. When activated, the VID:PID resets
> to 1199:90b1 ("application" mode) + 1199:90b0 ("boot" mode, i.e. QDL).

Hi Ivan,
for the whole series 1-5, please include an lsusb -v or usb-devices 
listing for any device that you add support for.
What you find in device firmware or in Qualcomm SDK drivers does not 
necessarily reflect what has actually been manufactured and consequently 
 how those Id's could be used for a future different product.

The 1199:90d3 is already supported by the option serial driver and that 
is where devices with interfaces supported by their unique interface 
attributes belong instead of being supported by interface number in 
qcserial.

thanks
Lars