Re: [PATCH v2 1/4] dt-bindings: bluetooth: add 'qcom,product-variant'

[Krzysztof Kozlowski]

On 20/11/2024 10:54, Cheng Jiang wrote:
> Several Qualcomm projects will use the same Bluetooth chip, each
> focusing on different features. For instance, consumer projects
> prioritize the A2DP SRC feature, while IoT projects focus on the A2DP
> SINK feature, which may have more optimizations for coexistence when
> acting as a SINK. Due to the patch size, it is not feasible to include
> all features in a single firmware.
> 
> Therefore, the 'product-variant' devicetree property is used to provide
> product information for the Bluetooth driver to load the appropriate
> firmware.
> 
> If this property is not defined, the default firmware will be loaded,
> ensuring there are no backward compatibility issues with older
> devicetrees.
> 
> The product-variant defines like this:
>   0 - 15 (16 bits) are product line specific definitions
>   16 - 23 (8 bits) are for the product line.
>   24 - 31 (8 bits) are reserved for future use, 0 currently
> 
> |---------------------------------------------------------------------|
> |                       32 Bits                                       |
> |---------------------------------------------------------------------|
> |  31 - 24 (bits)   |    23 - 16 (bits)   | 15 - 0 (16 bits)          |
> |---------------------------------------------------------------------|
> |   Reserved        |    0: default       | 0: default                |
> |                   |    1: CE            |                           |
> |                   |    2: IoT           |                           |
> |                   |    3: Auto          |                           |
> |                   |    4: Reserved      |                           |
> |---------------------------------------------------------------------|
> 
> Signed-off-by: Cheng Jiang <quic_chejiang@xxxxxxxxxxx>
> ---
>  .../bindings/net/bluetooth/qualcomm-bluetooth.yaml          | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml
> index 7bb68311c609..9019fe7bcdc6 100644
> --- a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml
> +++ b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml
> @@ -110,6 +110,12 @@ properties:
>      description:
>        boot firmware is incorrectly passing the address in big-endian order
>  
> +  qcom,product-variant:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description:
> +      specify the product information for driver to load the appropriate firmware

Nah, you have firmware-name for this.


> +
> +
No clue why two blank lines...

Best regards,
Krzysztof