Re: [PATCH v4 06/10] pinctrl: rp1: Implement RaspberryPi RP1 gpio support

From: Stefan Wahren
Date: Mon Nov 25 2024 - 13:46:48 EST


Hi Andrea,

Am 24.11.24 um 11:51 schrieb Andrea della Porta:
The RP1 is an MFD supporting a gpio controller and /pinmux/pinctrl.
Add minimum support for the gpio only portion. The driver is in
pinctrl folder since upcoming patches will add the pinmux/pinctrl
support where the gpio part can be seen as an addition.

Signed-off-by: Andrea della Porta <andrea.porta@xxxxxxxx>
Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
MAINTAINERS | 1 +
drivers/pinctrl/Kconfig | 11 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl-rp1.c | 789 ++++++++++++++++++++++++++++++++++
4 files changed, 802 insertions(+)
create mode 100644 drivers/pinctrl/pinctrl-rp1.c
...
+
+static int rp1_pinctrl_probe(struct platform_device *pdev)
+{
+ struct regmap *gpio_regmap, *rio_regmap, *pads_regmap;
+ struct rp1_pinctrl *pc = &rp1_pinctrl_data;
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct gpio_irq_chip *girq;
+ int err, i;
+
+ pc->dev = dev;
+ pc->gpio_chip = rp1_gpio_chip;
+ pc->gpio_chip.parent = dev;
+
+ pc->gpio_base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(pc->gpio_base))
+ return dev_err_probe(dev, PTR_ERR(pc->gpio_base), "could not get GPIO IO memory\n");
+
+ pc->rio_base = devm_platform_ioremap_resource(pdev, 1);
+ if (IS_ERR(pc->rio_base))
+ return dev_err_probe(dev, PTR_ERR(pc->rio_base), "could not get RIO IO memory\n");
+
+ pc->pads_base = devm_platform_ioremap_resource(pdev, 2);
+ if (IS_ERR(pc->pads_base))
+ return dev_err_probe(dev, PTR_ERR(pc->pads_base), "could not get PADS IO memory\n");
+
+ gpio_regmap = devm_regmap_init_mmio(dev, pc->gpio_base,
+ &rp1_pinctrl_regmap_cfg);
+ if (IS_ERR(gpio_regmap))
+ return dev_err_probe(dev, PTR_ERR(gpio_regmap), "could not init GPIO regmap\n");
+
+ rio_regmap = devm_regmap_init_mmio(dev, pc->rio_base,
+ &rp1_pinctrl_regmap_cfg);
+ if (IS_ERR(rio_regmap))
+ return dev_err_probe(dev, PTR_ERR(rio_regmap), "could not init RIO regmap\n");
+
+ pads_regmap = devm_regmap_init_mmio(dev, pc->pads_base,
+ &rp1_pinctrl_regmap_cfg);
+ if (IS_ERR(pads_regmap))
+ return dev_err_probe(dev, PTR_ERR(pads_regmap), "could not init PADS regmap\n");
+
+ for (i = 0; i < RP1_NUM_BANKS; i++) {
+ const struct rp1_iobank_desc *bank = &rp1_iobanks[i];
+ int j;
+
+ for (j = 0; j < bank->num_gpios; j++) {
+ struct rp1_pin_info *pin =
+ &pc->pins[bank->min_gpio + j];
+ int reg_off;
+
+ pin->num = bank->min_gpio + j;
+ pin->bank = i;
+ pin->offset = j;
+
+ reg_off = bank->gpio_offset + pin->offset
+ * sizeof(u32) * 2;
Just a nit: the first * belongs in the line above

Except of this:

Reviewed-by: Stefan Wahren <wahrenst@xxxxxxx>