[PATCH v5 0/1] riscv: dts: starfive: jh7110-milkv-mars: enable usb0 host function

From: E Shattow
Date: Tue Nov 26 2024 - 02:58:19 EST


Enable host mode JH7110 on-chip USB for Milk-V Mars by setting host mode
and connect vbus pinctrl.

This functionality depends on setting the USB over-current register to
disable at bootloader phase, for example U-Boot:
https://patchwork.ozlabs.org/project/uboot/patch/20241012031328.4268-6-minda.chen@xxxxxxxxxxxxxxxx/

If the over-current register is not prepared for us then the result is no
change in functional outcome with this patch applied; there is an error
visible to the user and this additional usb configuration fails (same as
it is now). On Milk-V Mars with four USB-A ports this applies to one of the
ports and the remaining three VL805-connected ports via PCIe are not changed.

Changes since v4:
- Rebase on latest master

Changes since v3:
- Rebase on linux-next/master
- use tabs for code indent

Changes since v2:
- Rebase on 6.12

E Shattow (1):
riscv: dts: starfive: jh7110-milkv-mars: enable usb0 host function

.../boot/dts/starfive/jh7110-milkv-mars.dts | 18 +++++++++++++++++-
1 file changed, 17 insertions(+), 1 deletion(-)

--
2.45.2