[PATCH v1] mmc: sdhci-msm: Enable aggressive PM

[Yuanjie Yang]

The sdhci-msm driver supports the device in both RUNNING
and IDLE states, when eMMC/SD are not reading or writing,
eMMC/SD are in IDLE state, the power management module
will suspend the device(power off and reduce frequency,
etc.), putting the device into a low-power mode. But the
current sdhci-msm driver cannot put device enter into
low-power mode.

Enable aggressive PM capability to support runtime PM
functionality, allowing the eMMC/SD card to enter
lowe-power mode.

Signed-off-by: Yuanjie Yang <quic_yuanjiey@xxxxxxxxxxx>
---
 drivers/mmc/host/sdhci-msm.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
index e00208535bd1..e3444d223513 100644
--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -2627,6 +2627,7 @@ static int sdhci_msm_probe(struct platform_device *pdev)
 	}
 
 	msm_host->mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY | MMC_CAP_NEED_RSP_BUSY;
+	msm_host->mmc->caps |= MMC_CAP_AGGRESSIVE_PM;
 
 	/* Set the timeout value to max possible */
 	host->max_timeout_count = 0xF;
-- 
2.34.1