[PATCH v1 0/3] bluetooth: qca: Add QCA6698 Bluetooth chip

[Cheng Jiang]

QCA6698 chipset shares the same IP core as the WCN6855. However,
it has different RF components and RAM sizes, so new firmware
is needed.

This change allows driver to distinguish it from the WCN6855
and load the specific firmware. As the RF performance of
QCA6698 chip from different foundries may vary. Therefore use
different NVM to configure them based on board ID.

Cheng Jiang (3):
  arm64: dts: qcom: sa8775p-ride: Change the BT node
  dt-bindings: net: Add QCA6698 Bluetooth
  Bluetooth: btqca: Add QCA6698 support

 .../net/bluetooth/qualcomm-bluetooth.yaml     |  2 +
 arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi    |  2 +-
 drivers/bluetooth/btqca.c                     | 47 ++++++++++++++++++-
 drivers/bluetooth/btqca.h                     |  1 +
 drivers/bluetooth/hci_qca.c                   | 36 +++++++++++++-
 5 files changed, 84 insertions(+), 4 deletions(-)


base-commit: f486c8aa16b8172f63bddc70116a0c897a7f3f02
--
2.25.1