[PATCH v2 0/4] Driver for Apple Z2 touchscreens.

From: Sasha Finkelstein via B4 Relay
Date: Thu Nov 28 2024 - 17:29:44 EST


Hi.

This series adds support for Apple touchscreens using the Z2 protocol.
Those are used as the primary touchscreen on mobile Apple devices, and for the
touchbar on laptops using the M-series chips. (T1/T2 laptops have a coprocessor
in charge of speaking Z2 to the touchbar).

Originally sent as a RFC at https://lore.kernel.org/all/20230223-z2-for-ml-v1-0-028f2b85dc15@xxxxxxxxx/
The changes since then mostly address the review feedback, but also
add another machine that has this specific controller.

Signed-off-by: Sasha Finkelstein <fnkl.kernel@xxxxxxxxx>
---
Changes in v2:
- In a separate patch, fixed an issue that prevented the SPI controller
from using GPIO CS, and as such, moved the hardware quirk to there
- Went back to uploading the firmware in probe() instad of open()
- Other changes addressing the review feedback
- Link to v1: https://lore.kernel.org/r/20241126-z2-v1-0-c43c4cc6200d@xxxxxxxxx

---
Sasha Finkelstein (4):
dt-bindings: input: touchscreen: Add Z2 controller
input: apple_z2: Add a driver for Apple Z2 touchscreens
arm64: dts: apple: Add touchbar digitizer nodes
MAINTAINERS: Add entries for Apple Z2 touchscreen driver

.../input/touchscreen/apple,z2-multitouch.yaml | 69 ++++
MAINTAINERS | 2 +
arch/arm64/boot/dts/apple/t8103-j293.dts | 26 ++
arch/arm64/boot/dts/apple/t8103.dtsi | 20 +
arch/arm64/boot/dts/apple/t8112-j493.dts | 24 ++
arch/arm64/boot/dts/apple/t8112.dtsi | 14 +
drivers/input/touchscreen/Kconfig | 13 +
drivers/input/touchscreen/Makefile | 1 +
drivers/input/touchscreen/apple_z2.c | 458 +++++++++++++++++++++
9 files changed, 627 insertions(+)
---
base-commit: 9f16d5e6f220661f73b36a4be1b21575651d8833
change-id: 20241124-z2-c012b528ea0d