Re: [PATCH v6 00/28] Qualcomm iris video decoder driver
From: Hans Verkuil
Date: Fri Nov 29 2024 - 04:25:00 EST
Hi Dikshita,
On 20/11/2024 15:45, Dikshita Agarwal wrote:
> Introduce support for Qualcomm new video acceleration hardware i.e.
> iris, used for video stream decoding.
>
> Iris is a multi pipe based hardware that offloads video stream decoding
> from the application processor (AP). It supports H.264 decoding. The AP
> communicates with hardware through a well defined protocol, called as
> host firmware interface (HFI), which provides fine-grained and
> asynchronous control over individual hardware features.
>
> This driver implements upgraded HFI gen2 to communicate with firmware.
> It supports SM8550 which is based out of HFI gen 2. It also supports
> SM8250 which is based out of HFI gen1.
>
> This driver comes with below capabilities:
> - V4L2 complaint video driver with M2M and STREAMING capability.
> - Supports H264 decoder.
>
> This driver comes with below features:
> - Centralized resource management.
> - Centralized management of core and instance states.
> - Defines platform specific capabilities and features. As a results, it
> provides a single point of control to enable/disable a given feature
> depending on specific platform capabilities.
> - Handles various video recommended sequences, like DRC, Drain, Seek,
> EOS.
> - Implements asynchronous communication with hardware to achieve better
> experience in low latency usecases.
> - Output and capture planes are controlled independently. Thereby
> providing a way to reconfigure individual plane.
> - Native hardware support of LAST flag which is mandatory to align with
> port reconfiguration and DRAIN sequence as per V4L guidelines.
I finished my review of v6. I didn't review patches that deal with the HW
internals, I focussed on the use of the vb2 and V4L2 framework APIs.
Regards,
Hans
>
> Changes since v5:
> - Fixed the memory leak in firmware load (Bryan)
> - Updated all headers s/_LIKE_SO_/__LIKE_SO__ (Bryan)
> - Updated value of IFACEQ_MAX_BUF_COUNT to 64 (Bryan)
> - Removed actual_count from iris buffer structure and cleaned up
> vb2_queue_setup (Hans)
> - Used VIDEO_MAX_FRAME to set actual buffer to firmware (Hans)
> - Fixed the typo in commit log and subject of patch#12 (Hans)
> - Updated card field to Iris Decoder (Hans)
> - Removed redundant setting of byteused (Hans)
> - s/iris_driver/is_iris_driver (Jianhua)
> - Addressed all other review comments.
> - Link to v5: https://lore.kernel.org/r/20241105-qcom-video-iris-v5-0-a88e7c220f78@xxxxxxxxxxx
>
> Changes since v4:
> - Fixed commit message length for all patches (Krzysztof)
> - Migrated back to remove from remove_new (Uwe Kleine-König)
> - Removed support for g_volatle_ctrl (Hans)
> - Added changes to update minimum buffer count whenever the hardware
> requirement changes (Hans)
> - Removed state checks from try/g/s_fmt ioctls (Hans)
> - Removed wait_prepare() and wait_finish callbacks (Hans)
> - Added support for remove_bufs (Hans)
> - Added module param based configurability to select between venus and
> iris drivers for platforms supported by both drivers (Jianhua, Dmitry)
> - Addressed misc other review comments from Hans.
> - Fixed issues reported by kernel bot.
> - Link to v4: https://lore.kernel.org/r/20241014-qcom-video-iris-v4-v4-0-c5eaa4e9ab9e@xxxxxxxxxxx
>
> Changes since v3:
> - Fixed the style issues with dt binding (Krzysztof)
> - Pushed the patch to add maintainers to end of the series (Krzysztof,
> Dmitry)
> - Moved the resource initialization next to probe in iris_probe.c and
> squashed the patch of probe and resource initialization (Krzysztof)
> - Removed error prints from probe function (Krzysztof)
> - Defined bit fields used for register read/write with macros for better
> context (Bryan)
> - Converted if/else to switch/case wherever applicable (Bryan)
> - Removed defensive NULL checks wherever not required (Bryan, Krzysztof)
> - Removed core->state checks except for below scenarios (Bryan)
> - When reverse thread (firmware) can move the state of the core to
> error state.
> - When client can force close the driver and there are still pending
> firmware responses to be read from shared queues (msg and dbg)
> - For PM operations, since its a delayed autosuspend work and sys
> error handler from the reverse thread can move the state to core
> deinit state anytime.
> - Acquiring core->lock only for below scenarios (Bryan)
> - Writing to registers.
> - Reading/Writing from/to shared queues.
> - Traversing the instance list of core.
> - To protect the core->state when it can changed by reverse thread.
> - Acquiring inst->lock only for below scenario which is needed (Bryan)
> - Serializing the forward and reverse thread
> - To protect the inst structure where the values can be modified by
> firmware.
> - Removed usage of core->power_enabled (Krzysztof, Bryan)
> - Removed usage of mutex_is_locked (Krzysztof, Bryan)
> - Use C structure for instance caps (Dmitry)
> - Split the ctrl ops patch by keeping only the defines, struct and caps
> needed to intialize the ctrl handler and to implement s/g_ctrl
> (Dmitry)
> - Removed the instance state checks to allow v4l2-ctl, relying on
> standard vb2 checks instead. (Hans)
> - Converted APIs to void wherever applicable except for below (Bryan)
> - iris_hfi_gen2_handle_session_error and
> iris_hfi_gen2_handle_session_property cannot be converted to void
> even though they always return 0.
> Because these are two of the handlers invoked from
> iris_hfi_gen2_handle_session_response and are of
> iris_hfi_gen2_inst_hfi_range struct type, where same prototype is
> followed for all handlers and return type of all handers should be
> 'int'.
> And we cannot have a switch case/if else to handle these
> responses from firmware because we need to parse the responses in a
> particular sequence.
> That's why we opted for this handler based design instead of
> introducing multiple for loop with code duplication.
> - Fixed issues reported by kernel bot.
> - Fixed v4l2 compliance issue reported with "-s" options based on the
> inputs from Hans.
> - Addressed all other review comments and made some code improvements.
>
> Changes since v2:
> - introduced support for HFI gen1.
> - deprecated Encoder and HEVC, VP9 codecs.
> - removed custom vb2 mem ops and used standard framework instead.
> - added support for mmap streaming mode.
> - migrated all the buffer APIs to mem2mem helper functions.
> - registered iris buffer with vb2 framework.
> - migrated to clk_bulk, reset_bulk and icc_bulk APIs.
> - used pm_domain_attach/detach_list APIs.
> - migrated to read/writel and other available helpers for register
> access instead of custom wrappers.
> - added documentation for various structures.
> - addressed many other review comments from v2.
>
> Note: A harmless onetime error log "Lucid PLL latch failed. Output may
> be unstable!" is seen during bootup. It doesn't impact any video
> usecase and is currently under discussion.
>
> Static tools like checkpatch, smatch, dt_binding_check, sparse and
> Coccinelle run successfully with this driver.
>
> This driver is tested with v4l2-ctl[1] and Gstreamer[2].
>
> [1]: v4l2-ctl --verbose --set-fmt-video-out=pixelformat=H264
> --set-fmt-video=pixelformat=NV12 --stream-mmap --stream-out-mmap
> --stream-from /media/FVDO_Freeway_720p.264 --stream-to out.NV12
>
> [2]: gst-launch-1.0 filesrc location=/media/media/4k_decode_clip.264 !
> h264parse ! v4l2h264dec capture-io-mode=dmabuf ! kmssink
>
> The driver is tested with v4l2-compliance.
>
> Result on SM8550:
>
> v4l2-compliance --stream-from /media/FVDO_Freeway_720p.264 -s250
>
> v4l2-compliance 1.29.0-5273, 64 bits, 64-bit time_t
> v4l2-compliance SHA: 0ed98432fe68 2024-11-13 12:54:45
>
> Compliance test for iris_driver device /dev/video0:
>
> Driver Info:
> Driver name : iris_driver
> Card type : iris_decoder
> Bus info : platform:aa00000.video-codec
> Driver version : 6.12.0
> Capabilities : 0x84204000
> Video Memory-to-Memory Multiplanar
> Streaming
> Extended Pix Format
> Device Capabilities
> Device Caps : 0x04204000
> Video Memory-to-Memory Multiplanar
> Streaming
> Extended Pix Format
> Detected Stateful Decoder
>
> Required ioctls:
> test VIDIOC_QUERYCAP: OK
> test invalid ioctls: OK
>
> Allow for multiple opens:
> test second /dev/video0 open: OK
> test VIDIOC_QUERYCAP: OK
> test VIDIOC_G/S_PRIORITY: OK
> test for unlimited opens: OK
>
> Debug ioctls:
> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> test VIDIOC_LOG_STATUS: OK (Not Supported)
>
> Input ioctls:
> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 0 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> test VIDIOC_G/S_EDID: OK (Not Supported)
>
> Control ioctls:
> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> test VIDIOC_QUERYCTRL: OK
> test VIDIOC_G/S_CTRL: OK
> test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> Standard Controls: 5 Private Controls: 0
>
> Format ioctls:
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> test VIDIOC_G/S_PARM: OK (Not Supported)
> test VIDIOC_G_FBUF: OK (Not Supported)
> test VIDIOC_G_FMT: OK
> test VIDIOC_TRY_FMT: OK
> test VIDIOC_S_FMT: OK
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> test Cropping: OK
> test Composing: OK
> test Scaling: OK (Not Supported)
>
> Codec ioctls:
> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> test VIDIOC_(TRY_)DECODER_CMD: OK
>
> Buffer ioctls:
> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
> test CREATE_BUFS maximum buffers: OK
> test VIDIOC_REMOVE_BUFS: OK
> test VIDIOC_EXPBUF: OK
> test Requests: OK (Not Supported)
> test blocking wait: OK
>
> Test input 0:
>
> Streaming ioctls:
> test read/write: OK (Not Supported)
> test MMAP (select, REQBUFS): OK
> test MMAP (epoll, REQBUFS): OK
> test MMAP (select, CREATE_BUFS): OK
> test MMAP (epoll, CREATE_BUFS): OK
> test USERPTR (select): OK (Not Supported)
> test DMABUF: Cannot test, specify --expbuf-device
>
> Total for iris_driver device /dev/video0: 54, Succeeded: 54, Failed: 0,
> Warnings: 0
>
> Result on SM8250:
>
> v4l2-compliance --stream-from /media/FVDO_Freeway_720p.264 -s250
>
> v4l2-compliance 1.29.0-5273, 64 bits, 64-bit time_t
> v4l2-compliance SHA: 0ed98432fe68 2024-11-13 12:54:45
>
> Compliance test for iris_driver device /dev/video0:
>
> Driver Info:
> Driver name : iris_driver
> Card type : iris_decoder
> Bus info : platform:aa00000.video-codec
> Driver version : 6.12.0
> Capabilities : 0x84204000
> Video Memory-to-Memory Multiplanar
> Streaming
> Extended Pix Format
> Device Capabilities
> Device Caps : 0x04204000
> Video Memory-to-Memory Multiplanar
> Streaming
> Extended Pix Format
> Detected Stateful Decoder
>
> Required ioctls:
> test VIDIOC_QUERYCAP: OK
> test invalid ioctls: OK
>
> Allow for multiple opens:
> test second /dev/video0 open: OK
> test VIDIOC_QUERYCAP: OK
> test VIDIOC_G/S_PRIORITY: OK
> test for unlimited opens: OK
>
> Debug ioctls:
> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> test VIDIOC_LOG_STATUS: OK (Not Supported)
>
> Input ioctls:
> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 0 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> test VIDIOC_G/S_EDID: OK (Not Supported)
>
> Control ioctls:
> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> test VIDIOC_QUERYCTRL: OK
> test VIDIOC_G/S_CTRL: OK
> test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> Standard Controls: 5 Private Controls: 0
>
> Format ioctls:
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> test VIDIOC_G/S_PARM: OK (Not Supported)
> test VIDIOC_G_FBUF: OK (Not Supported)
> test VIDIOC_G_FMT: OK
> test VIDIOC_TRY_FMT: OK
> test VIDIOC_S_FMT: OK
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> test Cropping: OK
> test Composing: OK
> test Scaling: OK (Not Supported)
>
> Codec ioctls:
> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> test VIDIOC_(TRY_)DECODER_CMD: OK
>
> Buffer ioctls:
> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
> test CREATE_BUFS maximum buffers: OK
> test VIDIOC_REMOVE_BUFS: OK
> test VIDIOC_EXPBUF: OK
> test Requests: OK (Not Supported)
> test blocking wait: OK
>
> Test input 0:
>
> Streaming ioctls:
> test read/write: OK (Not Supported)
> test MMAP (select, REQBUFS): OK
> test MMAP (epoll, REQBUFS): OK
> test MMAP (select, CREATE_BUFS): OK
> test MMAP (epoll, CREATE_BUFS): OK
> test USERPTR (select): OK (Not Supported)
> test DMABUF: Cannot test, specify --expbuf-device
>
> Total for iris_driver device /dev/video0: 54, Succeeded: 54, Failed: 0,
> Warnings: 0
>
> The result of fluster test on SM8550:
>
> 77/135 while testing JVT-AVC_V1 with
> GStreamer-H.264-V4L2-Gst1.0.JVT-AVC_V1.
> The failing tests are:
> - 52 test vectors failed due to interlaced clips: Interlaced decoding is
> not supported in iris driver.
> Test Vectors:
> cabac_mot_fld0_full
> cabac_mot_mbaff0_full
> cabac_mot_picaff0_full
> CABREF3_Sand_D
> CAFI1_SVA_C
> CAMA1_Sony_C
> CAMA1_TOSHIBA_B
> cama1_vtc_c
> cama2_vtc_b
> CAMA3_Sand_E
> cama3_vtc_b
> CAMACI3_Sony_C
> CAMANL1_TOSHIBA_B
> CAMANL2_TOSHIBA_B
> CAMANL3_Sand_E
> CAMASL3_Sony_B
> CAMP_MOT_MBAFF_L30
> CAMP_MOT_MBAFF_L31
> CANLMA2_Sony_C
> CANLMA3_Sony_C
> CAPA1_TOSHIBA_B
> CAPAMA3_Sand_F
> cavlc_mot_fld0_full_B
> cavlc_mot_mbaff0_full_B
> cavlc_mot_picaff0_full_B
> CVCANLMA2_Sony_C
> CVFI1_Sony_D
> CVFI1_SVA_C
> CVFI2_Sony_H
> CVFI2_SVA_C
> CVMA1_Sony_D
> CVMA1_TOSHIBA_B
> CVMANL1_TOSHIBA_B
> CVMANL2_TOSHIBA_B
> CVMAPAQP3_Sony_E
> CVMAQP2_Sony_G
> CVMAQP3_Sony_D
> CVMP_MOT_FLD_L30_B
> CVNLFI1_Sony_C
> CVNLFI2_Sony_H
> CVPA1_TOSHIBA_B
> FI1_Sony_E
> MR6_BT_B
> MR7_BT_B
> MR8_BT_B
> MR9_BT_B
> Sharp_MP_Field_1_B
> Sharp_MP_Field_2_B
> Sharp_MP_Field_3_B
> Sharp_MP_PAFF_1r2
> Sharp_MP_PAFF_2r
> CVMP_MOT_FRM_L31_B
> - 3 test vectors failed due to unsupported bitstream.
> num_slice_group_minus1 greater than zero is not supported by the
> hardware.
> Test Vectors:
> FM1_BT_B
> FM1_FT_E
> FM2_SVA_C
> - 2 test vectors failed because SP_SLICE type is not supported by the
> hardware.
> Test Vectors:
> SP1_BT_A
> sp2_bt_b
> - 1 test vector failed due to unsupported profile:
> V4L2_MPEG_VIDEO_H264_PROFILE_EXTENDED is being deprecated from sm8550
> onwards due to hardware issues.
> Test Vectors:
> BA3_SVA_C
>
> 23/69 while testing JVT-FR-EXT with
> GStreamer-H.264-V4L2-Gst1.0.JVT-AVC_V1.
> The failing tests are:
> - 21 test vectors failed due to interlaced clips: Interlaced decoding is
> not supported in iris driver.
> Test Vectors:
> brcm_freh4
> brcm_freh5
> brcm_freh6
> brcm_freh10
> brcm_freh11
> freh7_b
> FREXT01_JVC_D
> FREXT02_JVC_C
> FRExt2_Panasonic_C
> FRExt4_Panasonic_B
> HCAFF1_HHI_B
> HCAMFF1_HHI_B
> HCHP3_HHI_A
> HPCAFL_BRCM_C
> HPCAFLNL_BRCM_C
> HVLCFI0_Sony_B
> HVLCMFF0_Sony_B
> HVLCPFF0_Sony_B
> HPCAMAPALQ_BRCM_B
> HPCVFL_BRCM_A
> HPCVFLNL_BRCM_A
> - 2 test vectors failed due to 10bit bitstream: 10bit decoding is not
> supported in iris driver
> Test Vectors:
> FREH10-1
> FREH10-2
> - 21 test vectors failed due to unsupported profile:
> V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_422 is not supported by the
> hardware.
> Test Vectors:
> FREXT1_TANDBERG_A
> FREXT2_TANDBERG_A
> FREXT3_TANDBERG_A
> Hi422FR1_SONY_A
> Hi422FR2_SONY_A
> Hi422FR3_SONY_A
> Hi422FR4_SONY_A
> Hi422FR6_SONY_A
> Hi422FR7_SONY_A
> Hi422FR8_SONY_A
> Hi422FR9_SONY_A
> Hi422FR10_SONY_A
> Hi422FR11_SONY_A
> Hi422FR12_SONY_A
> Hi422FR13_SONY_A
> Hi422FR14_SONY_A
> Hi422FR15_SONY_A
> Hi422FREXT16_SONY_A
> Hi422FREXT17_SONY_A
> Hi422FREXT18_SONY_A
> Hi422FREXT19_SONY_A
> - 2 test vectors failed due to unsupported bitstream.
> chroma_fmt_idc is equal to 0(monochrome) in the bitstream which is not
> supported by the hardware.
> Test Vectors:
> HPCAMOLQ_BRCM_B
> HPCVMOLQ_BRCM_B
>
> The result of fluster test on SM8250:
>
> 78/135 while testing JVT-AVC_V1 with
> GStreamer-H.264-V4L2-Gst1.0.JVT-AVC_V1.
> The failing tests are:
> - 52 test vectors failed due to interlaced clips: Interlaced decoding is
> not supported in iris driver.
> Test Vectors:
> cabac_mot_fld0_full
> cabac_mot_mbaff0_full
> cabac_mot_picaff0_full
> CABREF3_Sand_D
> CAFI1_SVA_C
> CAMA1_Sony_C
> CAMA1_TOSHIBA_B
> cama1_vtc_c
> cama2_vtc_b
> CAMA3_Sand_E
> cama3_vtc_b
> CAMACI3_Sony_C
> CAMANL1_TOSHIBA_B
> CAMANL2_TOSHIBA_B
> CAMANL3_Sand_E
> CAMASL3_Sony_B
> CAMP_MOT_MBAFF_L30
> CAMP_MOT_MBAFF_L31
> CANLMA2_Sony_C
> CANLMA3_Sony_C
> CAPA1_TOSHIBA_B
> CAPAMA3_Sand_F
> cavlc_mot_fld0_full_B
> cavlc_mot_mbaff0_full_B
> cavlc_mot_picaff0_full_B
> CVCANLMA2_Sony_C
> CVFI1_Sony_D
> CVFI1_SVA_C
> CVFI2_Sony_H
> CVFI2_SVA_C
> CVMA1_Sony_D
> CVMA1_TOSHIBA_B
> CVMANL1_TOSHIBA_B
> CVMANL2_TOSHIBA_B
> CVMAPAQP3_Sony_E
> CVMAQP2_Sony_G
> CVMAQP3_Sony_D
> CVMP_MOT_FLD_L30_B
> CVNLFI1_Sony_C
> CVNLFI2_Sony_H
> CVPA1_TOSHIBA_B
> FI1_Sony_E
> MR6_BT_B
> MR7_BT_B
> MR8_BT_B
> MR9_BT_B
> Sharp_MP_Field_1_B
> Sharp_MP_Field_2_B
> Sharp_MP_Field_3_B
> Sharp_MP_PAFF_1r2
> Sharp_MP_PAFF_2r
> CVMP_MOT_FRM_L31_B
> - 3 test vectors failed due to unsupported bitstream.
> num_slice_group_minus1 greater than zero is not supported by the
> hardware.
> Test Vectors:
> FM1_BT_B
> FM1_FT_E
> FM2_SVA_C
> - 2 test vectors failed because SP_SLICE type is not supported by the
> hardware.
> Test Vectors:
> SP1_BT_A
> sp2_bt_b
>
> 23/69 while testing JVT-FR-EXT with
> GStreamer-H.264-V4L2-Gst1.0.JVT-AVC_V1.
> The failing tests are:
> - 21 test vectors failed due to interlaced clips: Interlaced decoding is
> not supported in iris driver.
> Test Vectors:
> brcm_freh4
> brcm_freh5
> brcm_freh6
> brcm_freh10
> brcm_freh11
> freh7_b
> FREXT01_JVC_D
> FREXT02_JVC_C
> FRExt2_Panasonic_C
> FRExt4_Panasonic_B
> HCAFF1_HHI_B
> HCAMFF1_HHI_B
> HCHP3_HHI_A
> HPCAFL_BRCM_C
> HPCAFLNL_BRCM_C
> HVLCFI0_Sony_B
> HVLCMFF0_Sony_B
> HVLCPFF0_Sony_B
> HPCAMAPALQ_BRCM_B
> HPCVFL_BRCM_A
> HPCVFLNL_BRCM_A
> - 2 test vectors failed due to 10bit bitstream: 10bit decoding is not
> supported in iris driver
> Test Vectors:
> FREH10-1
> FREH10-2
> - 21 test vectors failed due to unsupported profile:
> V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_422 is not supported by the
> hardware.
> Test Vectors:
> FREXT1_TANDBERG_A
> FREXT2_TANDBERG_A
> FREXT3_TANDBERG_A
> Hi422FR1_SONY_A
> Hi422FR2_SONY_A
> Hi422FR3_SONY_A
> Hi422FR4_SONY_A
> Hi422FR6_SONY_A
> Hi422FR7_SONY_A
> Hi422FR8_SONY_A
> Hi422FR9_SONY_A
> Hi422FR10_SONY_A
> Hi422FR11_SONY_A
> Hi422FR12_SONY_A
> Hi422FR13_SONY_A
> Hi422FR14_SONY_A
> Hi422FR15_SONY_A
> Hi422FREXT16_SONY_A
> Hi422FREXT17_SONY_A
> Hi422FREXT18_SONY_A
> Hi422FREXT19_SONY_A
> - 2 test vectors failed due to unsupported bitstream.
> chroma_fmt_idc is equal to 0(monochrome) in the bitstream which is not
> supported by the hardware.
> Test Vectors:
> HPCAMOLQ_BRCM_B
> HPCVMOLQ_BRCM_B
>
> To: Vikash Garodia <quic_vgarodia@xxxxxxxxxxx>
> To: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
> To: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
> To: Rob Herring <robh@xxxxxxxxxx>
> To: Krzysztof Kozlowski <krzk+dt@xxxxxxxxxx>
> To: Conor Dooley <conor+dt@xxxxxxxxxx>
> To: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
> Cc: Hans Verkuil <hverkuil@xxxxxxxxx>
> Cc: Sebastian Fricke <sebastian.fricke@xxxxxxxxxxxxx>
> Cc: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
> Cc: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> Cc: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
> Cc: Nicolas Dufresne <nicolas@xxxxxxxxxxxx>
> Cc: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
> Cc: Jianhua Lu <lujianhua000@xxxxxxxxx>
> Cc: linux-media@xxxxxxxxxxxxxxx
> Cc: linux-arm-msm@xxxxxxxxxxxxxxx
> Cc: devicetree@xxxxxxxxxxxxxxx
> Cc: linux-kernel@xxxxxxxxxxxxxxx
>
> Signed-off-by: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
> ---
> Dikshita Agarwal (18):
> dt-bindings: media: Add video support for QCOM SM8550 SoC
> media: iris: add platform driver for iris video device
> media: iris: implement iris v4l2 file ops
> media: iris: introduce iris core state management with shared queues
> media: iris: implement video firmware load/unload
> media: iris: implement boot sequence of the firmware
> media: iris: introduce host firmware interface with necessary hooks
> media: iris: implement power management
> media: iris: implement reqbuf ioctl with vb2_queue_setup
> media: iris: implement iris v4l2_ctrl_ops
> media: iris: implement vb2 streaming ops
> media: iris: allocate, initialize and queue internal buffers
> media: iris: implement vb2 ops for buf_queue and firmware response
> media: iris: add support for dynamic resolution change
> media: iris: handle streamoff/on from client in dynamic resolution change
> media: iris: add support for drain sequence
> media: iris: enable video driver probe of SM8250 SoC
> media: MAINTAINERS: add Qualcomm iris video accelerator driver
>
> Vedang Nagar (10):
> media: iris: implement s_fmt, g_fmt and try_fmt ioctls
> media: iris: implement g_selection ioctl
> media: iris: implement enum_fmt and enum_framesizes ioctls
> media: iris: implement subscribe_event and unsubscribe_event ioctls
> media: iris: implement query_cap ioctl
> media: iris: implement set properties to firmware during streamon
> media: iris: subscribe parameters and properties to firmware for hfi_gen2
> media: iris: add check whether the video session is supported or not
> media: iris: implement power scaling for vpu2 and vpu3
> media: iris: add check to allow sub states transitions
>
> .../bindings/media/qcom,sm8550-iris.yaml | 158 ++++
> MAINTAINERS | 10 +
> drivers/media/platform/qcom/Kconfig | 1 +
> drivers/media/platform/qcom/Makefile | 1 +
> drivers/media/platform/qcom/iris/Kconfig | 13 +
> drivers/media/platform/qcom/iris/Makefile | 27 +
> drivers/media/platform/qcom/iris/iris_buffer.c | 624 ++++++++++++++
> drivers/media/platform/qcom/iris/iris_buffer.h | 117 +++
> drivers/media/platform/qcom/iris/iris_core.c | 96 +++
> drivers/media/platform/qcom/iris/iris_core.h | 111 +++
> drivers/media/platform/qcom/iris/iris_ctrls.c | 259 ++++++
> drivers/media/platform/qcom/iris/iris_ctrls.h | 22 +
> drivers/media/platform/qcom/iris/iris_firmware.c | 110 +++
> drivers/media/platform/qcom/iris/iris_firmware.h | 15 +
> drivers/media/platform/qcom/iris/iris_hfi_common.c | 176 ++++
> drivers/media/platform/qcom/iris/iris_hfi_common.h | 155 ++++
> drivers/media/platform/qcom/iris/iris_hfi_gen1.h | 16 +
> .../platform/qcom/iris/iris_hfi_gen1_command.c | 826 ++++++++++++++++++
> .../platform/qcom/iris/iris_hfi_gen1_defines.h | 448 ++++++++++
> .../platform/qcom/iris/iris_hfi_gen1_response.c | 666 ++++++++++++++
> drivers/media/platform/qcom/iris/iris_hfi_gen2.h | 41 +
> .../platform/qcom/iris/iris_hfi_gen2_command.c | 957 +++++++++++++++++++++
> .../platform/qcom/iris/iris_hfi_gen2_defines.h | 160 ++++
> .../platform/qcom/iris/iris_hfi_gen2_packet.c | 292 +++++++
> .../platform/qcom/iris/iris_hfi_gen2_packet.h | 125 +++
> .../platform/qcom/iris/iris_hfi_gen2_response.c | 931 ++++++++++++++++++++
> drivers/media/platform/qcom/iris/iris_hfi_queue.c | 314 +++++++
> drivers/media/platform/qcom/iris/iris_hfi_queue.h | 182 ++++
> drivers/media/platform/qcom/iris/iris_instance.h | 79 ++
> .../platform/qcom/iris/iris_platform_common.h | 186 ++++
> .../platform/qcom/iris/iris_platform_sm8250.c | 148 ++++
> .../platform/qcom/iris/iris_platform_sm8550.c | 265 ++++++
> drivers/media/platform/qcom/iris/iris_power.c | 140 +++
> drivers/media/platform/qcom/iris/iris_power.h | 13 +
> drivers/media/platform/qcom/iris/iris_probe.c | 378 ++++++++
> drivers/media/platform/qcom/iris/iris_resources.c | 131 +++
> drivers/media/platform/qcom/iris/iris_resources.h | 18 +
> drivers/media/platform/qcom/iris/iris_state.c | 276 ++++++
> drivers/media/platform/qcom/iris/iris_state.h | 144 ++++
> drivers/media/platform/qcom/iris/iris_utils.c | 90 ++
> drivers/media/platform/qcom/iris/iris_utils.h | 53 ++
> drivers/media/platform/qcom/iris/iris_vb2.c | 336 ++++++++
> drivers/media/platform/qcom/iris/iris_vb2.h | 19 +
> drivers/media/platform/qcom/iris/iris_vdec.c | 662 ++++++++++++++
> drivers/media/platform/qcom/iris/iris_vdec.h | 25 +
> drivers/media/platform/qcom/iris/iris_vidc.c | 455 ++++++++++
> drivers/media/platform/qcom/iris/iris_vidc.h | 15 +
> drivers/media/platform/qcom/iris/iris_vpu2.c | 38 +
> drivers/media/platform/qcom/iris/iris_vpu3.c | 122 +++
> drivers/media/platform/qcom/iris/iris_vpu_buffer.c | 270 ++++++
> drivers/media/platform/qcom/iris/iris_vpu_buffer.h | 91 ++
> drivers/media/platform/qcom/iris/iris_vpu_common.c | 369 ++++++++
> drivers/media/platform/qcom/iris/iris_vpu_common.h | 28 +
> .../platform/qcom/iris/iris_vpu_register_defines.h | 17 +
> 54 files changed, 11221 insertions(+)
> ---
> base-commit: 698b6e3163bafd61e1b7d13572e2c42974ac85ec
> change-id: 20241028-qcom-video-iris-94d5a12e6d9e
>
> Best regards,