Re: [PATCH v5 1/2] dt-bindings: power: supply: Add STC3117 Fuel Gauge

[Krzysztof Kozlowski]

On 29/11/2024 12:40, Bhavin Sharma wrote:
> The STC3117 provides a simple fuel gauge via I2C.
> Add a DT schema to describe how to set it up in the device tree.
> 
> Signed-off-by: Hardevsinh Palaniya <hardevsinh.palaniya@xxxxxxxxxxxxxxxxx>
> Signed-off-by: Bhavin Sharma <bhavin.sharma@xxxxxxxxxxxxxxxxx>


Your SoBs are odd... second patch has totally reversed path comparing to
this one. What do you want to express here?

> ---
>  .../bindings/power/supply/st,stc3117.yaml     | 81 +++++++++++++++++++
>  1 file changed, 81 insertions(+)




> +
> +  monitored-battery:
> +    description: |
> +      The fuel gauge uses the following battery properties:
> +      - charge-full-design-microamp-hours
> +      - voltage-min-design-microvolt
> +      - voltage-max-design-microvolt
> +
> +  sense-resistor:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description: Current sense resistor in milliohms

phandle cannot be in milliohms... Anyway, use existing widely used
property: shunt-resistor-micro-ohms

> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - monitored-battery
> +  - sense-resistor
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    i2c {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +
> +      bat: battery {
> +        compatible = "simple-battery";
> +        charge-full-design-microamp-hours = <2600000>;
> +        voltage-min-design-microvolt = <3300000>;
> +        voltage-max-design-microvolt = <4250000>;
> +      };

Drop battery node, not needed for example.

> +
> +      battery@70 {
> +        compatible = "st,stc3117";
> +        reg = <0x70>;
> +        interrupt-parent = <&gpio0>;
> +        interrupts = <31 IRQ_TYPE_LEVEL_LOW>;

It does not look like you tested the bindings, at least after quick
look. Please run `make dt_binding_check` (see
Documentation/devicetree/bindings/writing-schema.rst for instructions).
Maybe you need to update your dtschema and yamllint.


Best regards,
Krzysztof