Re: [PATCH v3 1/2] dt-bindings: iio: adf4371: add rdiv2 and doubler
From: Jonathan Cameron
Date: Sat Nov 30 2024 - 11:40:27 EST
On Fri, 29 Nov 2024 17:33:52 +0200
Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx> wrote:
> Add support for reference doubler enable and reference divide by 2
> clock.
>
> Both of these blocks are optional on the frequency path within the
> chip and can be adjusted depending on the custom needs of the
> applications.
Thanks for the additional info!
>
> The doubler is useful for increasing the PFD comparison frequency
> which will result in a noise performance of the system.
So I'll play devil's advocate. Improved noise performance sounds
good. If it doesn't take me out of range of allowed frequencies, why
would I not turn it on? What is it about the surrounding circuitry
etc that would make this a bad idea for some uses of this chip
but not others?
>
> The reference divide by 2 divides the reference signal by 2,
> resulting in a 50% duty cycle PFD frequency.
why would I want one of those? My 'guess' is this makes sense
if the reference frequency is too high after the application of
the scaling done by the 5 bit counter. In effect it means the
division circuitry does divide by 1-31, 2-64 in steps of 2.
That could all be wrapped up in the existing control of the
frequency, and so far I'm still not seeing a strong reason why
it belongs in DT.
The 50% cycle thing is a bit of a red herring as assuming it
is triggered on say the rising edge of the high frequency signal
to toggle the divided signal, that will always be a 50% duty cycle.
Jonathan
>
> Signed-off-by: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
> ---
> changes in v3:
> - add explanation in commit body
> .../devicetree/bindings/iio/frequency/adf4371.yaml | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
> index 1cb2adaf66f9..ef241c38520c 100644
> --- a/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
> +++ b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
> @@ -40,6 +40,17 @@ properties:
> output stage will shut down until the ADF4371/ADF4372 achieves lock as
> measured by the digital lock detect circuitry.
>
> + adi,reference-doubler-enable:
> + type: boolean
> + description:
> + If this property is present, the reference doubler block is enabled.
> +
> + adi,adi,reference-div2-enable:
> + type: boolean
> + description:
> + If this property is present, the reference divide by 2 clock is enabled.
> + This feature can be used to provide a 50% duty cycle signal to the PFD.
> +
> required:
> - compatible
> - reg