Re: [PATCH v2 2/2] iio: adc: ad-sigma-delta: Document ABI for sigma delta adc

[Jonathan Cameron]

On Wed, 27 Nov 2024 10:06:14 +0100
Guillaume Ranquet <granquet@xxxxxxxxxxxx> wrote:

> Add common calibration nodes for sigma delta adc.
> 
> Signed-off-by: Guillaume Ranquet <granquet@xxxxxxxxxxxx>
Hi Guillaume.

I think there are some issues with the old docs that should be tidied up whilst
we are here :(

Just fix them up in this patch then mention it in the patch description.
Or if you prefer move and then fix in separate patches.


Jonathan

> ---
>  .../ABI/testing/sysfs-bus-iio-adc-ad-sigma-delta   | 23 +++++++++++++++++++++
>  Documentation/ABI/testing/sysfs-bus-iio-adc-ad7192 | 24 ----------------------
>  2 files changed, 23 insertions(+), 24 deletions(-)
> 
> diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-ad-sigma-delta b/Documentation/ABI/testing/sysfs-bus-iio-adc-ad-sigma-delta
> new file mode 100644
> index 0000000000000000000000000000000000000000..c2c55a966163736aea8d46fc5089c08dac747b84
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-bus-iio-adc-ad-sigma-delta
> @@ -0,0 +1,23 @@
> +What:		/sys/bus/iio/devices/iio:deviceX/in_voltagex_sys_calibration
in_voltageY_sys_calibration

(as indices are capital letters and X is used earlier).


> +KernelVersion:
Make an estimate of this I'll never remember to fill them in whilst applying.

It should make the next merge window I hope!

> +Contact:	linux-iio@xxxxxxxxxxxxxxx
> +Description:
> +		This attribute, if available, initiates the system calibration procedure. This is done on a
> +		single channel at a time. Write '1' to start the calibration.
> +
> +What:		/sys/bus/iio/devices/iio:deviceX/in_voltagex_sys_calibration_mode_available
> +KernelVersion:
> +Contact:	linux-iio@xxxxxxxxxxxxxxx
> +Description:
> +		This attribute, if available, returns a list with the possible calibration modes.
> +		There are two available options:
> +		"zero_scale" - calibrate to zero scale
> +		"full_scale" - calibrate to full scale
> +
> +What:		/sys/bus/iio/devices/iio:deviceX/in_voltagex_sys_calibration_mode
> +KernelVersion:
> +Contact:	linux-iio@xxxxxxxxxxxxxxx
> +Description:
> +		This attribute, if available, sets up the calibration mode used in the system calibration
> +		procedure. Reading returns the current calibration mode.
> +		Writing sets the system calibration mode.
> diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-ad7192 b/Documentation/ABI/testing/sysfs-bus-iio-adc-ad7192
> index f8315202c8f0df2bd4b7216f5cf8d3c2780fcf3f..28be1cabf1124ac7593392e17e4759ddfac829e8 100644
> --- a/Documentation/ABI/testing/sysfs-bus-iio-adc-ad7192
> +++ b/Documentation/ABI/testing/sysfs-bus-iio-adc-ad7192
> @@ -19,33 +19,9 @@ Description:
>  		the bridge can be disconnected (when it is not being used
>  		using the bridge_switch_en attribute.
>  
> -What:		/sys/bus/iio/devices/iio:deviceX/in_voltagex_sys_calibration
Huh.  That would explain the x above. I assume it is per channel?

> -KernelVersion:
> -Contact:	linux-iio@xxxxxxxxxxxxxxx
> -Description:
> -		Initiates the system calibration procedure. This is done on a
> -		single channel at a time. Write '1' to start the calibration.
> -
>  What:		/sys/bus/iio/devices/iio:deviceX/in_voltage2-voltage2_shorted_raw
>  KernelVersion:
>  Contact:	linux-iio@xxxxxxxxxxxxxxx
>  Description:
>  		Measure voltage from AIN2 pin connected to AIN(+)
>  		and AIN(-) shorted.
> -
> -What:		/sys/bus/iio/devices/iio:deviceX/in_voltagex_sys_calibration_mode_available
> -KernelVersion:
> -Contact:	linux-iio@xxxxxxxxxxxxxxx
> -Description:
> -		Reading returns a list with the possible calibration modes.
> -		There are two available options:
> -		"zero_scale" - calibrate to zero scale
> -		"full_scale" - calibrate to full scale
> -
> -What:		/sys/bus/iio/devices/iio:deviceX/in_voltagex_sys_calibration_mode
> -KernelVersion:
> -Contact:	linux-iio@xxxxxxxxxxxxxxx
> -Description:
> -		Sets up the calibration mode used in the system calibration
> -		procedure. Reading returns the current calibration mode.
> -		Writing sets the system calibration mode.
>