Re: [PATCH v3 0/4] Add i.MX91 platform support

[Pengfei Li]

On Wed, Nov 20, 2024 at 05:49:41PM +0800, Pengfei Li wrote:
> The design of the i.MX91 platform is very similar to i.MX93.
> The mainly difference between i.MX91 and i.MX93 is as follows:
> - i.MX91 removed some clocks and modified the names of some clocks.
> - i.MX91 only has one A core
> - i.MX91 has different pinmux
> 
> Therefore, i.MX91 can reuse i.MX93 dtsi.
> 
> ---
> Change for v3:
> - Add Conor's ack on patch #1
> - format imx91-11x11-evk.dts with the dt-format tool
> - add lpi2c1 node
> - link to v2: https://lore.kernel.org/all/20241118051541.2621360-1-pengfei.li_1@xxxxxxx/
> 
> Pengfei Li (4):
>   dt-bindings: arm: fsl: Add i.MX91 11x11 evk board
>   arm64: dts: freescale: Add i.MX91 dtsi support
>   arm64: dts: freescale: Add i.MX91 11x11 EVK basic support
>   arm64: defconfig: enable i.MX91 pinctrl
> 
>  .../devicetree/bindings/arm/fsl.yaml          |   6 +
>  arch/arm64/boot/dts/freescale/Makefile        |   1 +
>  .../boot/dts/freescale/imx91-11x11-evk.dts    | 875 ++++++++++++++++++
>  arch/arm64/boot/dts/freescale/imx91-pinfunc.h | 770 +++++++++++++++
>  arch/arm64/boot/dts/freescale/imx91.dtsi      |  70 ++
>  arch/arm64/configs/defconfig                  |   1 +
>  6 files changed, 1723 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/freescale/imx91-11x11-evk.dts
>  create mode 100644 arch/arm64/boot/dts/freescale/imx91-pinfunc.h
>  create mode 100644 arch/arm64/boot/dts/freescale/imx91.dtsi
> 
> -- 
> 2.34.1
> 
> 

Hi Rob Herring,

I haven't received any comments from others about this version of the patch set, is this patch set applicable?

BR,
Pengfei Li