Pls try add interface with type __ap or directly use hostapd up the ap interfaces that will re-type managed to ap.And you want setup sta + sap + sap, right?Your proposed interface combination fails as well for me if I am just
setting 2APs.
When up the second sap will meet error? Could you pls share the errorThis is the log that is appearing:
logs?
[ 61.909165] 8021q: 802.1Q VLAN Support v1.8
[ 62.227530] ath11k_pci 0000:01:00.0: failed to create vdev 3, reached max vdev limit 3
It is appearing after configuring both APs when only one AP is up and when
both are down (see my previous 'iw dev' outputs).
I'm not very sure if you add all interface with managed type, and doYes, I am setting the link up before running hostapd.
"ifconfig xxx up" before running hostapd.
You can try add second and third interface withAnd yes, I am doing like that for both APs.
"iw dev xx interface add xx type __ap".
Please, take into account that everything is working with the old interfacef019f4dff2e4 ("wifi: ath11k: support 2 station interfaces") update about interface combination limits.
configuration and when it is set with the parameter (no error log), but it
is not working for me with your interface combination.
Have you tried with 2.4GHz band?2.4GHz works fine also.
Thanks
Best regards
Jose Ignacio