[PATCH v6 RESEND net-next 5/5] net: enetc: add UDP segmentation offload support

[Wei Fang]

Set NETIF_F_GSO_UDP_L4 bit of hw_features and features because i.MX95
enetc and LS1028A driver implements UDP segmentation.

- i.MX95 ENETC supports UDP segmentation via LSO.
- LS1028A ENETC supports UDP segmentation since the commit 3d5b459ba0e3
("net: tso: add UDP segmentation support").

Signed-off-by: Wei Fang <wei.fang@xxxxxxx>
Reviewed-by: Frank Li <Frank.Li@xxxxxxx>
---
v2: rephrase the commit message
v3: no changes
v4: fix typo in commit message
v5: no changes
v6: no changes
---
 drivers/net/ethernet/freescale/enetc/enetc_pf_common.c | 6 ++++--
 drivers/net/ethernet/freescale/enetc/enetc_vf.c        | 6 ++++--
 2 files changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf_common.c b/drivers/net/ethernet/freescale/enetc/enetc_pf_common.c
index 82a67356abe4..76fc3c6fdec1 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_pf_common.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc_pf_common.c
@@ -110,11 +110,13 @@ void enetc_pf_netdev_setup(struct enetc_si *si, struct net_device *ndev,
 	ndev->hw_features = NETIF_F_SG | NETIF_F_RXCSUM |
 			    NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX |
 			    NETIF_F_HW_VLAN_CTAG_FILTER | NETIF_F_LOOPBACK |
-			    NETIF_F_HW_CSUM | NETIF_F_TSO | NETIF_F_TSO6;
+			    NETIF_F_HW_CSUM | NETIF_F_TSO | NETIF_F_TSO6 |
+			    NETIF_F_GSO_UDP_L4;
 	ndev->features = NETIF_F_HIGHDMA | NETIF_F_SG | NETIF_F_RXCSUM |
 			 NETIF_F_HW_VLAN_CTAG_TX |
 			 NETIF_F_HW_VLAN_CTAG_RX |
-			 NETIF_F_HW_CSUM | NETIF_F_TSO | NETIF_F_TSO6;
+			 NETIF_F_HW_CSUM | NETIF_F_TSO | NETIF_F_TSO6 |
+			 NETIF_F_GSO_UDP_L4;
 	ndev->vlan_features = NETIF_F_SG | NETIF_F_HW_CSUM |
 			      NETIF_F_TSO | NETIF_F_TSO6;
 
diff --git a/drivers/net/ethernet/freescale/enetc/enetc_vf.c b/drivers/net/ethernet/freescale/enetc/enetc_vf.c
index 63d78b2b8670..3768752b6008 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_vf.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc_vf.c
@@ -145,11 +145,13 @@ static void enetc_vf_netdev_setup(struct enetc_si *si, struct net_device *ndev,
 	ndev->hw_features = NETIF_F_SG | NETIF_F_RXCSUM |
 			    NETIF_F_HW_VLAN_CTAG_TX |
 			    NETIF_F_HW_VLAN_CTAG_RX |
-			    NETIF_F_HW_CSUM | NETIF_F_TSO | NETIF_F_TSO6;
+			    NETIF_F_HW_CSUM | NETIF_F_TSO | NETIF_F_TSO6 |
+			    NETIF_F_GSO_UDP_L4;
 	ndev->features = NETIF_F_HIGHDMA | NETIF_F_SG | NETIF_F_RXCSUM |
 			 NETIF_F_HW_VLAN_CTAG_TX |
 			 NETIF_F_HW_VLAN_CTAG_RX |
-			 NETIF_F_HW_CSUM | NETIF_F_TSO | NETIF_F_TSO6;
+			 NETIF_F_HW_CSUM | NETIF_F_TSO | NETIF_F_TSO6 |
+			 NETIF_F_GSO_UDP_L4;
 	ndev->vlan_features = NETIF_F_SG | NETIF_F_HW_CSUM |
 			      NETIF_F_TSO | NETIF_F_TSO6;
 
-- 
2.34.1