Re: [PATCH v3 06/10] dt-bindings: iio: accel: add interrupt-names

[Krzysztof Kozlowski]

On Tue, Dec 03, 2024 at 08:52:37PM +0000, Lothar Rubusch wrote:
> Add interrupt-names INT1 and INT2 for the two interrupt lines of the
> sensor. Only one line will be connected for incoming events. The driver
> needs to be configured accordingly. If no interrupt line is set up, the
> sensor will still measure, but no events are possible.
> 
> Signed-off-by: Lothar Rubusch <l.rubusch@xxxxxxxxx>
> ---
>  .../devicetree/bindings/iio/accel/adi,adxl345.yaml  | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
> index 280ed479ef5..c3483a4b652 100644
> --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
> +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
> @@ -37,6 +37,17 @@ properties:
>    interrupts:
>      maxItems: 1
>  
> +  interrupt-names:
> +    Data ready is only available on INT1, but events can use either or
> +    both pins.  If not specified, first element assumed to correspond
> +    to INT1 and second (where present) to INT2.
> +  minItems: 1
> +  maxItems: 2

This does not match your interrupts property.


> +  items:
> +    enum:
> +      - INT1
> +      - INT2

Best regards,
Krzysztof