Re: [PATCH 1/4] power: supply: add support for max77759 fuel gauge

[Thomas Antoine]

On 12/3/24 12:06, André Draszik wrote:
> On Tue, 2024-12-03 at 11:30 +0100, Thomas Antoine wrote:
>> Should I explicitly deny their use in the code for the max77759 or is it
>> just for information?
> I'd probably do something like this, which will indeed deny their reading
> and/or writing, both via debugfs, and also normal driver access via
> readmap_read()/write() etc:
> 
> static const struct regmap_range max77759_registers[] = {
> 	regmap_reg_range(0x00, 0x4f),
> 	regmap_reg_range(0xb0, 0xbf),
> 	regmap_reg_range(0xd0, 0xd0),
> 	regmap_reg_range(0xdc, 0xdf),
> 	regmap_reg_range(0xfb, 0xfb),
> 	regmap_reg_range(0xff, 0xff),
> };
> 
> static const struct regmap_range max77759_ro_registers[] = {
> 	regmap_reg_range(0x3d, 0x3d),
> 	regmap_reg_range(0xfb, 0xfb),
> 	regmap_reg_range(0xff, 0xff),
> };
> 
> static const struct regmap_access_table max77759_write_table = {
> 	.yes_ranges = max77759_registers,
> 	.n_yes_ranges = ARRAY_SIZE(max77759_registers),
> 	.no_ranges = max77759_ro_registers,
> 	.n_no_ranges = ARRAY_SIZE(max77759_ro_registers),
> };
> 
> static const struct regmap_access_table max77759_rd_table = {
> 	.yes_ranges = max77759_registers,
> 	.n_yes_ranges = ARRAY_SIZE(max77759_registers),
> };
> 
> static const struct regmap_config max77759_regmap_config = {
> 	.reg_bits = 8,
> 	.val_bits = 8,
> 	.max_register = 0xff,
> 	.wr_table = &max77759_write_table,
> 	.rd_table = &max77759_rd_table,
> 	.cache_type = REGCACHE_NONE,
> };
> 
> And maybe without cache for now. Most are probably not cacheable anyway.

Thank you very much, I'll try this out.

Best regards,
Thomas