Re: [net-next PATCH v8 3/4] net: dsa: Add Airoha AN8855 5-Port Gigabit DSA Switch driver
From: Russell King (Oracle)
Date: Wed Dec 04 2024 - 04:27:10 EST
On Wed, Dec 04, 2024 at 10:14:31AM +0100, Christian Marangi wrote:
> On Wed, Dec 04, 2024 at 10:09:22AM +0100, Maxime Chevallier wrote:
> > > + case 5:
> > > + phy_interface_set_rgmii(config->supported_interfaces);
> > > + __set_bit(PHY_INTERFACE_MODE_SGMII,
> > > + config->supported_interfaces);
> > > + __set_bit(PHY_INTERFACE_MODE_2500BASEX,
> > > + config->supported_interfaces);
> > > + break;
> > > + }
> > > +
> > > + config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
> > > + MAC_10 | MAC_100 | MAC_1000FD;
> >
> > For port 5, you may also add the MAC_2500FD capability as it supports
> > 2500BASEX ?
> >
>
> I didn't account for the CPU port that runs at 2.5. The LAN port are
> only 1g. Will add or maybe add the 2500FD only for cpu port?
>
> Maybe Russel can help in this?
*ll* please.
Well, 2500BASE-X runs at 2.5G, so if MAC_2500FD isn't set in the mask,
validation will fail for 2500BASE-X.
> > > + case SPEED_5000:
> > > + reg |= AN8855_PMCR_FORCE_SPEED_5000;
> > > + break;
> >
> > There's no mention of any mode that can give support for the 5000Mbps
> > speed, is it a leftover from previous work on the driver ?
> >
>
> Added 5000 as this is present in documentation bits but CPU can only go
> up to 2.5. Should I drop it? Idea was to futureproof it since it really
> seems they added these bits with the intention of having a newer switch
> with more advanced ports.
Is there any mention of supporting interfaces faster than 2500BASE-X ?
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!