Re: [PATCH v3 1/1] pps: clients: gpio: Bypass edge's direction check when not needed

[Bastien Curutchet]

Hi Rodolfo,

I revive this topic.

On 6/26/24 4:16 PM, Rodolfo Giometti wrote:
> On 26/06/24 14:55, Bastien Curutchet wrote:
> > Hi Rodolfo
> >
> > On 4/25/24 14:42, Rodolfo Giometti wrote:
> > > On 25/04/24 14:28, Bastien Curutchet wrote:
> > > > In the IRQ handler, the GPIO's state is read to verify the direction of
> > > > the edge that triggered the interruption before generating the PPS 
> > > > event.
> > > > If a pulse is too short, the GPIO line can reach back its original 
> > > > state
> > > > before this verification and the PPS event is lost.
> > > >
> > > > This check is needed when info->capture_clear is set because it needs
> > > > interruptions on both rising and falling edges. When info- 
> > > > >capture_clear
> > > > is not set, interruption is triggered by one edge only so this check 
> > > > can
> > > > be omitted.
> > > >
> > > > Add a warning if irq_handler is left without triggering any PPS event.
> > > > Bypass the edge's direction verification when info->capture_clear is 
> > > > not
> > > > set.
> > > >
> > > > Signed-off-by: Bastien Curutchet <bastien.curutchet@xxxxxxxxxxx>
> > >
> > > Acked-by: Rodolfo Giometti <giometti@xxxxxxxxxxxx>
> >
> > I don't think I've received any updates since you acked this. Is there 
> > something missing before the patch can be applied?
>
> No updates. It can be applied.

In the MAINTAINER file, you are listed as the sole maintainer for the 
PPS subsystem. Could you let me know if there's someone else in charge 
of applying patches so I can gently ping them please ?

I checked, the patch still applies to v6.13-rc1

Best regards,
Bastien