Re: [PATCH v3 2/5] ASoC: dt-bindings: wcd937x-sdw: Add static channel mapping support

From: Krzysztof Kozlowski
Date: Thu Dec 05 2024 - 02:24:31 EST


On 05/12/2024 04:56, Mohammad Rafi Shaik wrote:
> On 11/27/2024 1:38 PM, Krzysztof Kozlowski wrote:
>> On Tue, Nov 26, 2024 at 10:12:57PM +0530, Mohammad Rafi Shaik wrote:
>>> diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd937x-sdw.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd937x-sdw.yaml
>>> index d3cf8f59cb23..7893b1c1f80b 100644
>>> --- a/Documentation/devicetree/bindings/sound/qcom,wcd937x-sdw.yaml
>>> +++ b/Documentation/devicetree/bindings/sound/qcom,wcd937x-sdw.yaml
>>> @@ -58,6 +58,44 @@ properties:
>>> items:
>>> enum: [1, 2, 3, 4, 5]
>>>
>>> + qcom,tx-channel-mapping:
>>> + description: |
>>> + Specifies static channel mapping between slave and master tx port
>>> + channels.
>>> + In the order of slave port channels which is adc1, adc2, adc3,
>>> + dmic0, dmic1, mbhc, dmic2, dmic3, dmci4, dmic5, dmic6, dmic7.
>>> + The channel map index values are fixed values.
>>> + SWRM_CH1 ==> 1
>>> + SWRM_CH2 ==> 2
>>> + SWRM_CH3 ==> 4
>>> + SWRM_CH4 ==> 8
>>
>> I am surprised to see here again 1/2/4/8. My comments were not
>> addressed. I think we agreed during our off-list talk that you will use
>> 1, 2, 3 and 4.
>>
> Ack,
>
> Yes right,
>
> Will add the change in next patch set.
>
> will add the channel map values starting from 0 based on order of slave
> port channels which are starting from 0.
>
> SWRM_CH1 ==> 0
> SWRM_CH2 ==> 1
> SWRM_CH3 ==> 2
> SWRM_CH4 ==> 3
These are supposed to be channels, so 1=1, 2=2 not 1=0.

Best regards,
Krzysztof