Re: [PATCH v4 06/10] dt-bindings: iio: accel: add interrupt-names

[Krzysztof Kozlowski]

On Wed, Dec 04, 2024 at 06:24:47PM +0000, Lothar Rubusch wrote:
> Add interrupt-names INT1 and INT2 for the two interrupt lines of the
> sensor. Only one line will be connected for incoming events. The driver
> needs to be configured accordingly. If no interrupt line is set up, the
> sensor will still measure, but no events are possible.
> 
> Signed-off-by: Lothar Rubusch <l.rubusch@xxxxxxxxx>
> ---
>  .../devicetree/bindings/iio/accel/adi,adxl345.yaml    | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
> index 280ed479ef5..a4c2cefe1a4 100644
> --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
> +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
> @@ -37,6 +37,15 @@ properties:
>    interrupts:
>      maxItems: 1
>  
> +  interrupt-names:
> +    description: Use either INT1 or INT2 for events, or ignore events.
> +    minItems: 1
> +    maxItems: 2

No improvements, no responses and according to commit msg you have only
one item, so instead above and below just:

description: .........
items:
 - enum: [ int1, int2]


Best regards,
Krzysztof