On the MT8167 which is based on the MT8516 DTS, the following error
was appearing on boot, breaking interrupt operation:
GICv2 detected, but range too small and irqchip.gicv2_force_probe not set
Similar to what's been proposed for MT7622 which has the same issue,
fix by using the range reported by force_probe.
Link: https://lore.kernel.org/all/YmhNSLgp%2Fyg8Vr1F@xxxxxxxxxxxxxx/
Fixes: 5236347bde42 ("arm64: dts: mediatek: add dtsi for MT8516")
Signed-off-by: Val Packett <val@xxxxxxxxxxxx>
---
arch/arm64/boot/dts/mediatek/mt8516.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8516.dtsi b/arch/arm64/boot/dts/mediatek/mt8516.dtsi
index d0b03dc4d3f4..444429341302 100644
--- a/arch/arm64/boot/dts/mediatek/mt8516.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8516.dtsi
@@ -268,7 +268,7 @@ gic: interrupt-controller@10310000 {
interrupt-parent = <&gic>;
interrupt-controller;
reg = <0 0x10310000 0 0x1000>,
- <0 0x10320000 0 0x1000>,
+ <0 0x1032f000 0 0x2000>,
<0 0x10340000 0 0x2000>,
<0 0x10360000 0 0x2000>;
interrupts = <GIC_PPI 9