[PATCH 0/5] Add support for Priva E-Measuringbox board

From: Oleksij Rempel
Date: Thu Dec 05 2024 - 07:57:05 EST


This patch series introduces support for the Priva E-Measuringbox board
based on the ST STM32MP133 SoC. The set includes all the necessary
changes for device tree bindings, vendor prefixes, thermal support, and
board-specific devicetree to pass devicetree validation and checkpatch
tests.

Oleksij Rempel (3):
dt-bindings: net: Add TI DP83TD510 10BaseT1L PHY
dt-bindings: vendor-prefixes: Add prefix for Priva
dt-bindings: arm: stm32: Add Priva E-Measuringbox board

Roan van Dijk (2):
arm: dts: stm32: Add thermal support for STM32MP131
arm: dts: stm32: Add Priva E-Measuringbox devicetree

.../devicetree/bindings/arm/stm32/stm32.yaml | 6 +
.../devicetree/bindings/net/ti,dp83td510.yaml | 35 ++
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
arch/arm/boot/dts/st/Makefile | 1 +
arch/arm/boot/dts/st/stm32mp131.dtsi | 35 ++
arch/arm/boot/dts/st/stm32mp133c-prihmb.dts | 496 ++++++++++++++++++
6 files changed, 575 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/ti,dp83td510.yaml
create mode 100644 arch/arm/boot/dts/st/stm32mp133c-prihmb.dts

--
2.39.5