Re: [PATCH 1/3] arm64: dts: qcom: sc7280: Increase config size to 256MB for ECAM feature

[Konrad Dybcio]

On 16.11.2024 11:00 PM, Krishna chaitanya chundru wrote:
> Increase the configuration size to 256MB as required by the ECAM feature.
> And also move config space, DBI, ELBI, IATU to upper PCIe region and use
> lower PCIe region entierly for BAR region.
> 
> Signed-off-by: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sc7280.dtsi | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index 3d8410683402..a7e3d3e9d034 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -2196,10 +2196,10 @@ wifi: wifi@17a10040 {
>  		pcie1: pcie@1c08000 {
>  			compatible = "qcom,pcie-sc7280";
>  			reg = <0 0x01c08000 0 0x3000>,
> -			      <0 0x40000000 0 0xf1d>,
> -			      <0 0x40000f20 0 0xa8>,
> -			      <0 0x40001000 0 0x1000>,
> -			      <0 0x40100000 0 0x100000>;
> +			      <4 0x00000000 0 0xf1d>,
> +			      <4 0x00000f20 0 0xa8>,
> +			      <4 0x10000000 0 0x1000>,
> +			      <4 0x00000000 0 0x10000000>;

So this region is far bigger, any reason to use 256MiB specifically?

Konrad
>  
>  			reg-names = "parf", "dbi", "elbi", "atu", "config";
>  			device_type = "pci";
> @@ -2210,8 +2210,8 @@ pcie1: pcie@1c08000 {
>  			#address-cells = <3>;
>  			#size-cells = <2>;
>  
> -			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
> -				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
> +			ranges = <0x01000000 0x0 0x00000000 0x0 0x40000000 0x0 0x100000>,
> +				 <0x02000000 0x0 0x40100000 0x0 0x40100000 0x0 0x1ff00000>;
>  
>  			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
>  				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
>