[PATCH 1/2] cpufreq: qcom: Fix qcom_cpufreq_hw_recalc_rate() to query LUT if LMh IRQ is not available

[Manivannan Sadhasivam via B4 Relay]

From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>

Currently, qcom_cpufreq_hw_recalc_rate() returns the LMh throttled
frequency for the domain even if LMh IRQ is not available. But as per
qcom_cpufreq_hw_get(), the driver has to query LUT entries to get the
actual frequency of the domain. So do the same in
qcom_cpufreq_hw_recalc_rate().

While doing so, refactor the existing qcom_cpufreq_hw_get() function so
that qcom_cpufreq_hw_recalc_rate() can make use of the existing code and
avoid code duplication. This also requires setting the
qcom_cpufreq_data::policy even if LMh IRQ is not available.

Fixes: 4370232c727b ("cpufreq: qcom-hw: Add CPU clock provider support")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
 drivers/cpufreq/qcom-cpufreq-hw.c | 21 +++++++++++----------
 1 file changed, 11 insertions(+), 10 deletions(-)

diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
index 98129565acb8..c145ab7b0bb2 100644
--- a/drivers/cpufreq/qcom-cpufreq-hw.c
+++ b/drivers/cpufreq/qcom-cpufreq-hw.c
@@ -143,14 +143,12 @@ static unsigned long qcom_lmh_get_throttle_freq(struct qcom_cpufreq_data *data)
 }
 
 /* Get the frequency requested by the cpufreq core for the CPU */
-static unsigned int qcom_cpufreq_get_freq(unsigned int cpu)
+static unsigned int qcom_cpufreq_get_freq(struct cpufreq_policy *policy)
 {
 	struct qcom_cpufreq_data *data;
 	const struct qcom_cpufreq_soc_data *soc_data;
-	struct cpufreq_policy *policy;
 	unsigned int index;
 
-	policy = cpufreq_cpu_get_raw(cpu);
 	if (!policy)
 		return 0;
 
@@ -163,12 +161,10 @@ static unsigned int qcom_cpufreq_get_freq(unsigned int cpu)
 	return policy->freq_table[index].frequency;
 }
 
-static unsigned int qcom_cpufreq_hw_get(unsigned int cpu)
+static unsigned int __qcom_cpufreq_hw_get(struct cpufreq_policy *policy)
 {
 	struct qcom_cpufreq_data *data;
-	struct cpufreq_policy *policy;
 
-	policy = cpufreq_cpu_get_raw(cpu);
 	if (!policy)
 		return 0;
 
@@ -177,7 +173,12 @@ static unsigned int qcom_cpufreq_hw_get(unsigned int cpu)
 	if (data->throttle_irq >= 0)
 		return qcom_lmh_get_throttle_freq(data) / HZ_PER_KHZ;
 
-	return qcom_cpufreq_get_freq(cpu);
+	return qcom_cpufreq_get_freq(policy);
+}
+
+static unsigned int qcom_cpufreq_hw_get(unsigned int cpu)
+{
+	return __qcom_cpufreq_hw_get(cpufreq_cpu_get_raw(cpu));
 }
 
 static unsigned int qcom_cpufreq_hw_fast_switch(struct cpufreq_policy *policy,
@@ -363,7 +364,7 @@ static void qcom_lmh_dcvs_notify(struct qcom_cpufreq_data *data)
 	 * If h/w throttled frequency is higher than what cpufreq has requested
 	 * for, then stop polling and switch back to interrupt mechanism.
 	 */
-	if (throttled_freq >= qcom_cpufreq_get_freq(cpu))
+	if (throttled_freq >= qcom_cpufreq_get_freq(cpufreq_cpu_get_raw(cpu)))
 		enable_irq(data->throttle_irq);
 	else
 		mod_delayed_work(system_highpri_wq, &data->throttle_work,
@@ -441,7 +442,6 @@ static int qcom_cpufreq_hw_lmh_init(struct cpufreq_policy *policy, int index)
 		return data->throttle_irq;
 
 	data->cancel_throttle = false;
-	data->policy = policy;
 
 	mutex_init(&data->throttle_lock);
 	INIT_DEFERRABLE_WORK(&data->throttle_work, qcom_lmh_dcvs_poll);
@@ -552,6 +552,7 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
 
 	policy->driver_data = data;
 	policy->dvfs_possible_from_any_cpu = true;
+	data->policy = policy;
 
 	ret = qcom_cpufreq_hw_read_lut(cpu_dev, policy);
 	if (ret) {
@@ -622,7 +623,7 @@ static unsigned long qcom_cpufreq_hw_recalc_rate(struct clk_hw *hw, unsigned lon
 {
 	struct qcom_cpufreq_data *data = container_of(hw, struct qcom_cpufreq_data, cpu_clk);
 
-	return qcom_lmh_get_throttle_freq(data);
+	return __qcom_cpufreq_hw_get(data->policy) * HZ_PER_KHZ;
 }
 
 static const struct clk_ops qcom_cpufreq_hw_clk_ops = {

-- 
2.25.1