Re: [PATCH v4 2/2] arm64: dts: qcom: qcs8300-ride: enable ethernet0

[Konrad Dybcio]

On 23.11.2024 8:41 PM, Andrew Lunn wrote:
> On Sat, Nov 23, 2024 at 04:51:54PM +0800, Yijie Yang wrote:
>> Enable the SerDes PHY on qcs8300-ride. Add the MDC and MDIO pin functions
>> for ethernet0 on qcs8300-ride. Enable the ethernet port on qcs8300-ride.
>>
>> Signed-off-by: Yijie Yang <quic_yijiyang@xxxxxxxxxxx>
>> ---
>>  arch/arm64/boot/dts/qcom/qcs8300-ride.dts | 112 ++++++++++++++++++++++++++++++
>>  1 file changed, 112 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
>> index 7eed19a694c39dbe791afb6a991db65acb37e597..af7be26828524cc28299e219c1f0ad459e1c543d 100644
>> --- a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
>> +++ b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
>> @@ -210,6 +210,95 @@ vreg_l9c: ldo9 {
>>  	};
>>  };
>>  
>> +&ethernet0 {
>> +	phy-mode = "2500base-x";
>> +	phy-handle = <&sgmii_phy0>;
> 
> Nit picking, but your PHY clearly is not an SGMII PHY if it is using
> 2500base-x. I would call it just phy0, so avoiding using SGMII
> wrongly, which most vendors do use the name SGMII wrongly.

Andrew, does that mean the rest of the patch looks ok?

If so, I don't have any concerns either.

Konrad