[PATCH v5 0/2] Enable ethernet for qcs8300
From: Yijie Yang
Date: Thu Dec 05 2024 - 20:36:11 EST
Add dts nodes to enable ethernet interface on qcs8300-ride.
The EMAC, SerDes and EPHY version are the same as those in sa8775p.
Signed-off-by: Yijie Yang <quic_yijiyang@xxxxxxxxxxx>
---
This patch series depends on below patch series:
https://lore.kernel.org/all/20240925-qcs8300_initial_dtsi-v2-0-494c40fa2a42@xxxxxxxxxxx/ - Reviewed
https://lore.kernel.org/all/20241010-schema-v1-0-98b2d0a2f7a2@xxxxxxxxxxx/ - Applied
Changes in v5:
- Pad the register with zero for both 'ethernet0' and 'serdes0'.
- Change PHY name from 'sgmii_phy0' to 'phy0'.
- Link to v4: https://lore.kernel.org/r/20241123-dts_qcs8300-v4-0-b10b8ac634a9@xxxxxxxxxxx
---
Yijie Yang (2):
arm64: dts: qcom: qcs8300: add the first 2.5G ethernet
arm64: dts: qcom: qcs8300-ride: enable ethernet0
arch/arm64/boot/dts/qcom/qcs8300-ride.dts | 112 ++++++++++++++++++++++++++++++
arch/arm64/boot/dts/qcom/qcs8300.dtsi | 43 ++++++++++++
2 files changed, 155 insertions(+)
---
base-commit: c83f0b825741bcb9d8a7be67c63f6b9045d30f5a
change-id: 20241111-dts_qcs8300-f8383ef0f5ef
Best regards,
--
Yijie Yang <quic_yijiyang@xxxxxxxxxxx>