My point is that you can try setup with ap type interface, now combination limits not allow up 3 inferfaces with managed interface.But I see your interfaces all be added with managed, right?Yes
Test steps:Ok, I am using a bridge with the AP interfaces in addition but it is
...
the same.
Indeed I have tested in the same way as you too (even using your
hostapd.conf with the suitable name for the interfaces).
So I have started to debug (current upstream linux +
https://lore.kernel.org/all/20241127022742.4016870-1-quic_yuzha@xxxxxxxxxxx/ +
dump_stack() in ath11k_mac_op_add_interface, enabling ath11k_dbg),
let me show you this:
[ 5.703295] ath11k_pci 0000:01:00.0: vdev a2:d8:da:c5:7b:79 created, vdev_id 0
[ 5.703304] CPU: 4 UID: 0 PID: 945 Comm: NetworkManager Tainted: G W 6.12.0+ #104
[ 5.703315] Tainted: [W]=WARN
[ 5.703317] Hardware name: ASUS System Product Name/PRIME B660-PLUS D4, BIOS 1620 08/12/2022
[ 5.703320] Call Trace:
[ 5.703325] <TASK>
[ 5.703330] dump_stack_lvl+0x5d/0x80
[ 5.703344] ath11k_mac_op_add_interface.cold+0x4ed/0xa92 [ath11k]
[ 5.703399] drv_add_interface+0x4f/0x230 [mac80211]
[ 5.703512] ieee80211_do_open+0x4b3/0x770 [mac80211]
[ 5.703669] ieee80211_open+0x8a/0x90 [mac80211]
...
[ 5.804755] ath11k_pci 0000:01:00.0: vdev c8:94:02:b5:fe:fb created, vdev_id 1
[ 5.804759] CPU: 1 UID: 0 PID: 1011 Comm: wpa_supplicant Tainted: G W 6.12.0+ #104
[ 5.804763] Tainted: [W]=WARN
[ 5.804765] Hardware name: ASUS System Product Name/PRIME B660-PLUS D4, BIOS 1620 08/12/2022
[ 5.804766] Call Trace:
[ 5.804770] <TASK>
[ 5.804773] dump_stack_lvl+0x5d/0x80
[ 5.804783] ath11k_mac_op_add_interface.cold+0x4ed/0xa92 [ath11k]
[ 5.804809] drv_add_interface+0x4f/0x230 [mac80211]
[ 5.804868] ieee80211_do_open+0x4b3/0x770 [mac80211]
[ 5.804934] nl80211_start_p2p_device+0x8b/0x160 [cfg80211]
...
So, since the normal sta interface and p2p interface are initialized,
with your proposed interface combination, only one AP interface can be
added for me (vdev limit is 3).
I like your idea to have a common interface combination set for everything,
but I think it is not possible here.
My patch with the new parameter at least allow to select what to do, dual
stations support or APs support for all the cases.
Thanks
Best regards
Jose Ignacio