Re: [PATCH v5 0/2] Enable ethernet for qcs8300

[Yijie Yang]

On 2024-12-06 10:37, Tingwei Zhang wrote:
> On 12/6/2024 9:35 AM, Yijie Yang wrote:
> > Add dts nodes to enable ethernet interface on qcs8300-ride.
> > The EMAC, SerDes and EPHY version are the same as those in sa8775p.
> >
> > Signed-off-by: Yijie Yang <quic_yijiyang@xxxxxxxxxxx>
> > ---
> > This patch series depends on below patch series:
> > https://lore.kernel.org/all/20240925-qcs8300_initial_dtsi- 
> > v2-0-494c40fa2a42@xxxxxxxxxxx/ - Reviewed
>
> Above series was already applied. I would say there's no dependency to 
> block this series to be applied now. No need to respin for this but 
> update the dependency status if a new version is required.

I will take care of it next time.

> > https://lore.kernel.org/all/20241010-schema- 
> > v1-0-98b2d0a2f7a2@xxxxxxxxxxx/ - Applied
> >
> > Changes in v5:
> > - Pad the register with zero for both 'ethernet0' and 'serdes0'.
> > - Change PHY name from 'sgmii_phy0' to 'phy0'.
> > - Link to v4: https://lore.kernel.org/r/20241123-dts_qcs8300-v4-0- 
> > b10b8ac634a9@xxxxxxxxxxx
> >
> > ---
> > Yijie Yang (2):
> >        arm64: dts: qcom: qcs8300: add the first 2.5G ethernet
> >        arm64: dts: qcom: qcs8300-ride: enable ethernet0
> >
> >   arch/arm64/boot/dts/qcom/qcs8300-ride.dts | 112 ++++++++++++++++++++ 
> > ++++++++++
> >   arch/arm64/boot/dts/qcom/qcs8300.dtsi     |  43 ++++++++++++
> >   2 files changed, 155 insertions(+)
> > ---
> > base-commit: c83f0b825741bcb9d8a7be67c63f6b9045d30f5a
> > change-id: 20241111-dts_qcs8300-f8383ef0f5ef
> >
> > Best regards,

--
Best Regards,
Yijie