RE: [PATCH v6 RESEND net-next 1/5] net: enetc: add Rx checksum offload for i.MX95 ENETC

[Wei Fang]

> -----Original Message-----
> From: Simon Horman <horms@xxxxxxxxxx>
> Sent: 2024年12月6日 20:31
> To: Wei Fang <wei.fang@xxxxxxx>
> Cc: Claudiu Manoil <claudiu.manoil@xxxxxxx>; Vladimir Oltean
> <vladimir.oltean@xxxxxxx>; Clark Wang <xiaoning.wang@xxxxxxx>;
> andrew+netdev@xxxxxxx; davem@xxxxxxxxxxxxx; edumazet@xxxxxxxxxx;
> kuba@xxxxxxxxxx; pabeni@xxxxxxxxxx; Frank Li <frank.li@xxxxxxx>;
> netdev@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; imx@xxxxxxxxxxxxxxx
> Subject: Re: [PATCH v6 RESEND net-next 1/5] net: enetc: add Rx checksum
> offload for i.MX95 ENETC
> 
> On Fri, Dec 06, 2024 at 10:33:15AM +0000, Wei Fang wrote:
> > > -----Original Message-----
> > > From: Simon Horman <horms@xxxxxxxxxx>
> > > Sent: 2024年12月6日 17:23
> > > To: Wei Fang <wei.fang@xxxxxxx>
> > > Cc: Claudiu Manoil <claudiu.manoil@xxxxxxx>; Vladimir Oltean
> > > <vladimir.oltean@xxxxxxx>; Clark Wang <xiaoning.wang@xxxxxxx>;
> > > andrew+netdev@xxxxxxx; davem@xxxxxxxxxxxxx; edumazet@xxxxxxxxxx;
> > > kuba@xxxxxxxxxx; pabeni@xxxxxxxxxx; Frank Li <frank.li@xxxxxxx>;
> > > netdev@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; imx@xxxxxxxxxxxxxxx
> > > Subject: Re: [PATCH v6 RESEND net-next 1/5] net: enetc: add Rx checksum
> > > offload for i.MX95 ENETC
> > >
> > > On Wed, Dec 04, 2024 at 01:29:28PM +0800, Wei Fang wrote:
> > > > ENETC rev 4.1 supports TCP and UDP checksum offload for receive, the bit
> > > > 108 of the Rx BD will be set if the TCP/UDP checksum is correct. Since
> > > > this capability is not defined in register, the rx_csum bit is added to
> > > > struct enetc_drvdata to indicate whether the device supports Rx
> checksum
> > > > offload.
> > > >
> > > > Signed-off-by: Wei Fang <wei.fang@xxxxxxx>
> > > > Reviewed-by: Frank Li <Frank.Li@xxxxxxx>
> > > > Reviewed-by: Claudiu Manoil <claudiu.manoil@xxxxxxx>
> > > > ---
> > > > v2: no changes
> > > > v3: no changes
> > > > v4: no changes
> > > > v5: no changes
> > > > v6: no changes
> > > > ---
> > > >  drivers/net/ethernet/freescale/enetc/enetc.c       | 14
> ++++++++++----
> > > >  drivers/net/ethernet/freescale/enetc/enetc.h       |  2 ++
> > > >  drivers/net/ethernet/freescale/enetc/enetc_hw.h    |  2 ++
> > > >  .../net/ethernet/freescale/enetc/enetc_pf_common.c |  3 +++
> > > >  4 files changed, 17 insertions(+), 4 deletions(-)
> > > >
> > > > diff --git a/drivers/net/ethernet/freescale/enetc/enetc.c
> > > b/drivers/net/ethernet/freescale/enetc/enetc.c
> > > > index 35634c516e26..3137b6ee62d3 100644
> > > > --- a/drivers/net/ethernet/freescale/enetc/enetc.c
> > > > +++ b/drivers/net/ethernet/freescale/enetc/enetc.c
> > > > @@ -1011,10 +1011,15 @@ static void enetc_get_offloads(struct
> enetc_bdr
> > > *rx_ring,
> > > >
> > > >  	/* TODO: hashing */
> > > >  	if (rx_ring->ndev->features & NETIF_F_RXCSUM) {
> > > > -		u16 inet_csum = le16_to_cpu(rxbd->r.inet_csum);
> > > > -
> > > > -		skb->csum = csum_unfold((__force
> __sum16)~htons(inet_csum));
> > > > -		skb->ip_summed = CHECKSUM_COMPLETE;
> > > > +		if (priv->active_offloads & ENETC_F_RXCSUM &&
> > > > +		    le16_to_cpu(rxbd->r.flags) &
> ENETC_RXBD_FLAG_L4_CSUM_OK)
> > > {
> > > > +			skb->ip_summed = CHECKSUM_UNNECESSARY;
> > > > +		} else {
> > > > +			u16 inet_csum = le16_to_cpu(rxbd->r.inet_csum);
> > > > +
> > > > +			skb->csum = csum_unfold((__force
> __sum16)~htons(inet_csum));
> > > > +			skb->ip_summed = CHECKSUM_COMPLETE;
> > > > +		}
> > > >  	}
> > >
> > > Hi Wei,
> > >
> > > I am wondering about the relationship between the above and
> > > hardware support for CHECKSUM_COMPLETE.
> > >
> > > Prior to this patch CHECKSUM_COMPLETE was always used, which seems
> > > desirable. But with this patch, CHECKSUM_UNNECESSARY is conditionally
> used.
> > >
> > > If those cases don't work with CHECKSUM_COMPLETE then is this a
> bug-fix?
> > >
> > > Or, alternatively, if those cases do work with CHECKSUM_COMPLETE, then
> > > I'm unsure why this change is necessary or desirable. It's my understanding
> > > that from the Kernel's perspective CHECKSUM_COMPLETE is preferable to
> > > CHECKSUM_UNNECESSARY.
> > >
> > > ...
> >
> > Rx checksum offload is a new feature of ENETC v4. We would like to exploit
> this
> > capability of the hardware to save CPU cycles in calculating and verifying
> checksum.
> >
> 
> Understood, but CHECKSUM_UNNECESSARY is usually the preferred option as
> it
> is more flexible, e.g. allowing low-cost calculation of inner checksums
> in the presence of encapsulation.

I think you mean 'CHECKSUM_COMPLETE' is the preferred option. But there is no
strong reason against using CHECKSUM_UNNECESSARY. So I hope to keep this patch.